Road vehicles — Hydraulic braking systems, including those with electronic control functions, for mo...
ISO 6597:2005 specifies the method of testing the hydraulic braking systems of vehicles of categories M and N which are built to comply with ECE-R 13/09, including supplements 1 to 7.The values in square brackets [ ] are taken from ECE Regulation No. 13 for information.
Hydraulic braking systems include vacuum-assisted and power hydraulic-assisted braking systems as well as full power hydraulic…
1. SCOPE
1.1 This standard applies to two types of automotive low-sulphur (LS) diesel fuel containing low levels of biodiesel
esters, Type A-LS, Bx and Type B-LS, Bx.
1.1.1 Bx represents biodiesel fuel containing x percent by volume of biodiesel ester component in the range of 1.0 to 5%.
1.2 Fuel to this standard is intended for use in high-speed diesel engines that require low-sulphur diesel…
Dispositifs de commande et de sécurité pour brûleurs à gaz et appareils à gaz — Exigences particuli...
L'ISO 23551-3:2005 spécifie les exigences de sécurité, de construction et de fonctionnement des dispositifs de régulation du rapport air/gaz, type pneumatique, pour des pressions amont inférieures ou égales à 50 kPa, d'un diamètre nominal de raccordement inférieur ou égal à DN 250, destinés à être utilisés avec les appareils utilisant des combustibles gazeux tels que gaz naturel, gaz…
Standard/Specification for Windows, Doors, and Unit Skylights
Preface
This is the first edition of AAMA/WDMA/CSA 101/I.S.2/A440-05, Standard/Specification for windows, doors, and unit skylights, jointly published by the American Architectural Manufacturers Association (AAMA), the Window & Door Manufacturers Association (WDMA), and the Canadian Standards Association (CSA).
1 Scope
1.1 General
This fenestration Standard/Specification applies to both…
Installation Code for Propane Fuel Systems and Tanks on Highway Vehicles
1 Scope
1.1
This Code applies to the installation, servicing, and repair of propane fuel system components and tanks on highway vehicles for the provision of motive power. This does not apply to vehicles qualified under the Canadian Motor Vehicle Safety Regulations.
1.2
Where the term "propane" is used, the requirements of this Code include, and apply equally to, any material…
Identification Cards - Contactless Integrated Circuit(s) Cards - Vicinity Cards - Part 2: Air Interf...
This National Standard of Canada is equivalent to International Standard ISO/IEC 15693-2:2000.
1 Scope
This part of ISO/IEC 15693 specifies the nature and characteristics of the fields to be provided for power and bidirectional communications between vicinity coupling devices (VCDs) and vicinity cards (VICCs).
This part of ISO/IEC 15693 shall be used in conjunction with other parts of…
Industrial automation systems and integration — Product data representation and exchange — Part 218:...
ISO 10303-218:2004 specifies the use of the integrated resources necessary for the scope and information requirements for the exchange of product definition data and its configuration and approval status information for ship structural systems. Configuration in this context pertains to data specific to revision tracking and change history of selected ship structural entities within the product…
Graphical symbols — Safety signs — Safety way guidance systems (SWGS)
ISO 16069:2004 describes the principles governing the design and application of visual components used to create a safety way guidance system (SWGS).
ISO 16069:2004 contains general principles valid both for electrically powered and for phosphorescent components. Special information which is related to the type of component is given to assist in defining the environment of use, choice of material…
Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie ...
La présente norme nationale du Canada est basee sur la norme internationale CEI 61010-1:2001, et est commune avec UL 61010-1.
1 Domaine d'application et objet
1.1 Domaine d'application
1.1.1 Appareils inclus dans le domaine d'application
La présente partie de la CEI 61010 spécifie les prescriptions générales de sécurité pour les appareils électriques destinés aux usages…
Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie ...
La présente norme nationale du Canada est équivalente à la norme internationale CEI/IEC 61010-2-101:2002 adoptée, première édition.
1.1 Domaine d'application Remplacement:
Cette partie 2 s'applique aux appareils médicaux destinés aux applications de diagnostic in vitro (DIV), y compris aux appareils médicaux d'autodiagnostic. Les appareils médicaux de diagnostic in vitro DIV,…
