Steel for the prestressing of concrete — Part 3: Quenched and tempered wire
Specifies requirements for round high tensile steel wires having plain, ribbed, grooved or indented surface. Table 1 includes the parameters for nominal wire diameters from 6,0 mm up to 16,0 mm. Annex A is for information only.
Fire extinguishing media — Halogenated hydrocarbons — Part 2: Code of practice for safe handling and...
Provides recommendations and information relevant to the health and safety of persons engaged in procedures to be used in the transfer of halon from one container to another.
Agents extincteurs — Hydrocarbures halogénés — Partie 2: Code de bonne pratique pour les procédures ...
La présente partie de l'ISO 7201 fournit des recommandations sur les procédures à utiliser pour le transfert des halons 1211 et 1301 d'un conteneur à l'autre, ce qui réduira toute émission inutile de halons dans l'atmosphère. Elle fournit également des recommandations et des informations concernant la santé et la sécurité des personnes utilisant ces procédures.
Transmissions par courroies — Courroies plates de transmission et poulies correspondantes — Dimensio...
La présente Norme internationale prescrit les principales caractéristiques dimensionnelles des courroies plates de transmission et celles des poulies correspondantes. Les annexes A et B (informatives) donnent, respectivement, le bombement des poulies et la correspondance normale recommandée entre les largeurs des courroies et les largeurs des poulies à utiliser.
Belt drives — Flat transmission belts and corresponding pulleys — Dimensions and tolerances
Specifies the principal dimensions. Annexes A (recommended crowns of the pulleys) and B (recommended correspondence between the widths of belts and the widths of the pulleys used) are for information only.
Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Rod end spherical eyes — Mounting dim...
Specifies the dimensions required for interchangeability. Table 1 gives the dimensions for rod end eyes with threads from M4 x 0,7 up to M48 x 2. This second edition cancels and replaces the first edition (1986). Annex A is for information only.
Specifies requirements and 39 terms and definitions. This second edition cancels and replaces the first edition (1985). Annexes A, B, C and D are for information only.
General Requirements for Pressure-Retaining Systems and Components in CANDU
Nuclear Power Plants
1.1
This Standard specifies the general requirements for the design,
fabrication, and installation of pressure-retaining systems, components,
and their supports in CANDU nuclear power plants.
1.2
This Standard, to the extent specified herein, applies to all
pressure-retaining systems and components and their supports in a nuclear
power plant.
1.3
When this Standard is adopted for…
Information Technology - Telecommunications and Information Exchange Between Systems - Protocol Comb...
This National Standard of Canada is equivalent to International Standard ISO/IEC 8880-1:1990.
1 Scope
This part of ISO/IEC 8880 specifies the protocol combinations to be used to
support the OSI Network Service defined in ISO 8348 and its Addendum 1. The
field of application of this part of ISO/IEC 8880 is that of the environments
defined in the other parts of ISO/IEC 8880. The field…