Rechercher

Specifies the method of providing in accordance with the procedures described in Recommendation X.31. This is done by specifying the mapping of the CONS primitives and parameters to and from the elements of the protocols used by two types of packet mode terminal equipment: an X.25 DTE (TE2) and a packet mode ISDN terminal (TE1).

Amends Introduction, adds actions to subclauses 8.2 and 9.2, replaces Section five (Abstract syntax) and annex A (Protocol state table).

Amends Introduction, clauses and subclauses 6.2, 6.3, 7.3, 7.4, 7.6, 8.1.6, 8.2.1 to 8.2.4, 12.2, 12.3.2, 12.4, 13.5 to 13.8, 14.1.2.12, 15, 15.1.1, 15.1.2, 15.1.2.3, 15.1.2.8, 15.1.2.9, 15.2.1, 15.3.2.3, 15.3.2.5, 15.4.1, 15.4.2, 15.4.2.1, 15.4.2.3, 16, 16.1.1, 16.1.2, 16.1.2.2, 16.2.1, 16.2.2, 16.2.2.2, A.6, tables 1, 6, 9, 10, figures 3, 13, 15, annexes B, E, adds subclauses 12.3.3, 13.14 to…

Applies to end systems concerned with operating in the Open Systems Interconnection (OSI) environment. Specifies a combination of OSI standards, which collectively provide the Connection-mode Transport Service using the Connectionless-mode Network Service. Profiles of the Connection-mode Transport Service over Connectionless-mode Network Service are members of a single group, Group TA, and…

Covers the taxonomy elements identified as "TA" in the Directory of Profiles and ISPs contained in ISO/IEC TR 10000-2. These elements constitute Transport profiles, group A: Connection-mode Transport Service over Connectionless-mode Network Service. Specifies requirements for the profile identified in ISO/IEC TR 10000 as TA51. The complete set of requirements for TA51 consists of the…

Covers the taxonomy elements identified as "TA" in the Directory of Profiles and ISPs contained in ISO/IEC TR 10000-2. These elements constitute Transport profiles, group A: Connection-mode Transport Service over Connectionless-mode Network Service. Specifies requirements for the profile identified in ISO/IEC TR 10000 as TA11n1. The complete set of requirements for TA11n1 consists of…

Specifies the physical and magnetic characteristics and also the quality of the recorded signal, the recorded format (DATA/DAT) and the recording method, thereby allowing data interchange between drives by means of such magnetic tape cartridges.

Three levels are given in such a way as to permit application for a wide range of welded fabrications. The levels refer to production quality and not to the fitness-for-purpose of the product manufactured. Annex A gives additional information and guidelines for use of this standard.