Canadian Geomatics Interchange Standard: Formal Definition
High Level Design Objectives
The Spatial Archive and Interchange Format was developed as a means of sharing
any information which can be referenced to the earth. SAIF's primary
objectives are as follows:
1) it must be appropriate for modelling and transferring virtually any data of
interest; that is, it must be practical to use with both geographic and
non-geographic information…
1.1
This specification applies to paint rollers, replacement sleeves and frames,
roller trays and extension handles.
1.2
For more detailed information on intended uses, see par. 8.2.
1.1
This Standard applies to eye and face protectors used in all occupational and
educational operations or processes involving hazards to the eyes or face.
Typical hazards include flying objects and particles, splashing liquids, molten
metal, and ultraviolet, visible, and infrared radiations, but do not include
X-rays, gamma rays, high-energy particulate radiation, radioactive materials,…
1. Scope
1.1 This Standard applies to cathode ray tubes and cathode ray tube assemblies (hereafter may be referred to for convenience as CRT) intended for use as components in apparatus designed to be used in accordance with the rules of the Canadian Electrical Code, Part I and the National Electric Code.
1.2 These requirements apply to CRTs intended for use in such apparatus as…
Operators and Systems and Doors, Gates, Draperies, and Louvres
1. Scope
1.1 This Standard applies to electrically powered door opening devices and other opening and closing appliances rated at 600 V or less and intended to be used in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I.
1.2 This Standard gives requirements for complete doors, gates, and other such assemblies that include electrically powered…
Exigences générales relatives aux systèmes et aux composants sous pression des
centrales nucléaires...
1.1 La présente norme énonce les exigences générales de conception, de
fabrication et d'installation des systèmes et composants sous pression de
centrales nucléaires CANDU et de leurs supports.
1.2 Cette norme s'applique à tous les systèmes et composants sous pression des
centrales nucléaires, ainsi qu'à leurs supports.
1.3 Dans les cas où cette norme est utilisée pour…
1.1 Généralités
1.1.1
Sous réserve de l'article 1.1.2, cette norme vise la conception, la
fabrication, l'installation, le fonctionnement et la vérification de toute
installation frigorifique régie par la loi et définie par ce code.
1.1.2
La norme ne vise pas les systèmes utilisant l'eau ou l'air comme frigorigène,
les réservoirs de stockage de gaz qui ne sont pas…
