1 Scope
1.1 General
This Standard specifies requirements for the identification of hazards, and assessment and control of risks, across first responder occupations. This Standard can be applied to any type of risk and can be applied to both sleep-related and task-related fatigue.
It is intended that this Standard be utilized to harmonize risk management processes in existing and future…
Système de gestion des risques liés à la fatigue des premiers intervenants
1 Domaine d’application
1.1 Généralités
Cette norme énonce les exigences relatives à la détermination des dangers, ainsi qu’à l’appréciation et à la maîtrise des risques, pour l’ensemble des emplois de premiers intervenants. Cette norme est applicable à tout type de risque et s’applique à la fatigue attribuable au manque de sommeil et à la fatigue liée aux tâches.
Elle est destinée à être…
1 Scope
1.1 Application
This Standard provides minimum requirements for oil-burning equipment, including
a)
fuel oil filters;
b)
draft regulators;
c)
flue pipe mounted heat reclaimers;
d)
through-the-wall venting systems;
e)
systems that supply outside combustion air; and
f)
used-oil-burning equipment.
1.2 Intended use
This Standard is to be used in conjunction with the other…
1 Scope
1.1 Application
This Standard applies to
a) oil burners of the atomizing type (irrespective of size, firing rate, or grade* of fuel oil) that are
designed primarily for installation in warm-air, hot-water, and steam-heating equipment;
* The grade of fuel oil should be as specified in CSA B140.0, except for grade B6-B20, which is specified in
ASTM D396.
b) atomizing-type oil burners…
1 Scope
1.1 Application
This Standard applies to complete, vent- (flue-) connected, or direct vent connected oil-fired warm air furnaces and unit heaters, irrespective of the heating capacity or the type of burner used. This Standard also applies to oil-fired condensing warm air furnaces.
1.2 Intent
This Standard applies to furnaces employing forced circulation of the heated air and furnaces…
1 Scope
1.1 Application
This Standard applies to
a)
complete vent (flue) -connected or direct-vent connected, oil-fired steam, and hot-water boilers that are provided with automatic control devices;
b)
oil-fired steam and hot-water condensing boilers;
c)
boilers having an input of less than 117.2 kW (400 000 Btu/h);
d)
low-pressure boilers (as defined in Clause 3) having an input of 117…
Oil-fired service water heaters for domestic hot water, space heating, and swimming pools
1 Scope
1.1 Intent
This Standard applies to complete flue-connected, oil-fired service water heaters that are provided with automatic control devices. These service water heaters may be used both for heating and for supplying of domestic hot water. They are not intended to be used as sole-source heating appliances.
1.2 Application
The requirements in this Standard apply to
a)
service water…
1 Scope
1.1
This Standard provides procedures for evaluating polymeric materials and parts made from polymeric materials intended for application in electrical equipment covered by the Canadian Electrical Code, Part II (CE Code, Part II), with respect to:
a)
flammability;
b)
mechanical properties;
c)
thermal properties;
d)
resistance to weathering; and
e)
electrical properties.
1.2…
1 Scope
1.1 Inclusions
This Standard specifies design and performance requirements for floor drains, adjustable floor drains, and area drains that are used inside of, or adjacent to, building structures. Drains of outlet NPS-2 and smaller, intended only for installation in shower areas, are covered in this Standard and in ASME A112.18.2/CSA B125.2 as well.
1.2 Exclusions
This Standard does…
1 Scope
1.1 Inclusions
This Standard specifies design and performance requirements for roof drains. This Standard applies to the following types of roof drains:
a)
general purpose;
b)
gutter and cornice;
c)
parapet and promenade;
d)
balcony; and
e)
deck.
1.2 Exclusions
This standard does not apply to siphonic roof drains covered under ASME A112.6.9/CSA B79.9.
1.3 Illustrations…
