Water Treatment Equipment and Water Quality Requirements for Hemodialysis
1 Scope
1.1
This Standard applies to
a) acute, chronic, and home-based hemodialysis;
b) water for preparing dialyzing fluid and concentrate for hemodialysis;
c) all water intended for contact with the dialyzing fluid pathway;
d) the baseline quality of the feed water and any other input water;
e) water treatment and monitoring equipment;
f) water distribution systems; and
g) product water used…
Decorative Gas Appliances for Installation in Solid-Fuel Burning Fireplaces
1.1 Scope
1.1.1 This standard applies to decorative gas appliances for installation in solid-fuel burning
fireplaces, (see Part IV, Definitions), hereinafter referred to as appliances, which are
constructed entirely of new, unused parts and materials:
a. For use with natural gas;
b. For use with propane;
c. For use with natural and convertible for use with propane gas (see Part IV, Definitions…
STANDARD LABORATORY GUIDE FOR THE DETERMINATION OF VOLATILE ORGANIC COMPOUND EMISSIONS FROM POLYURET...
1. INTRODUCTION
1.1 This laboratory guide has been developed for the assessment of volatile organic
compound emissions from polyurethane foam. It outlines a test procedure for the determination
of volatile organic compounds from the foam and explains why certain test conditions have been
selected. Upon agreement between the purchaser and the manufacturer, this test method may
be used for…
Information technology - Telecommunications and information exchange between systems - Private Integ...
ISO/IEC 15429:2003 specifies the signalling protocol for the support of the Wireless Terminal Location Registration supplementary service (SS-WTLR) and the Wireless Terminal Information exchange additional network feature (ANF-WTINFO) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN).
SS-…
Information technology — Telecommunications and information exchange between systems — Private Integ...
ISO/IEC 15429:2003 specifies the signalling protocol for the support of the Wireless Terminal Location Registration supplementary service (SS-WTLR) and the Wireless Terminal Information exchange additional network feature (ANF-WTINFO) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN).
SS-…
Connectors for electronic equipment - Part 3-104: Rectangular connectors - Detail specification for ...
Establishes uniform specifications, type testing requirements and quality assessment procedures for 8-way connectors, with up to 4 pairs, for frequencies up to 600 MHz minimum, and intended to be used at different locations within cabling for information and communications technology, home entertainment and multimedia. Contains a choice of all test methods and sequences, severity and preferred…
Household and Similar Electrical Appliances - Safety - Part 1: General Requirements
This National Standard of Canada is based on International Standard CEI/IEC 60335-1:2001, fourth edition, 2001-05.
1 Scope
The object of this Part 1 Standard is to specify general electrical safety requirements for certain products.
The requirements of this Standard apply to a specific end-use product when it is explicitly referred to by that product standard. Each individual product…
Information technology - Telecommunications and information exchange between systems - Private Integ...
ISO/IEC 15431:2003 specifies the signalling protocol for the support of the Wireless terminal call handling additional network features (ANF-WTMI and ANF-WTMO) at the Q reference point between Private Integrated services Network eXchanges (PINX) connected together within a Private Integrated Services Network (PISN).
ANF-WTMI is a feature that directs incoming calls to a WTMI user within the PISN…
Information technology — Telecommunications and information exchange between systems — Private Integ...
ISO/IEC 15431:2003 specifies the signalling protocol for the support of the Wireless terminal call handling additional network features (ANF-WTMI and ANF-WTMO) at the Q reference point between Private Integrated services Network eXchanges (PINX) connected together within a Private Integrated Services Network (PISN).
ANF-WTMI is a feature that directs incoming calls to a WTMI user within the PISN…
Information technology - Telecommunications and information exchange between systems - Private Integ...
ISO/IEC 17878:2003 specifies the signalling protocol for the support of the Private User Mobility call handling additional network features (ANF-PUMI and ANF-PUMO) at the Q reference point between Private Integrated services Network eXchanges (PINX) connected together within a Private Integrated Services Network (PISN).
ANF-PUMI is a feature that directs incoming calls to a PUM user within the…
