Information technology - Coding of audio-visual objects - Part 13: Intellectual Property Management ...
ISO/IEC 14496-13:2004 specifies:
The definition, as well as Extension tags, syntax and semantics for an IPMP_Data_BaseClass to support the following functionalities.Mutual Authentication for IPMP tool to IPMP tool as well as IPMP tool to Terminal communication.The requesting by IPMP tools of the connection/disconnection to requested IPMP tools.The notification to IPMP tools of the connection/…
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-4: Particula...
This International Standard applies to twist-on connecting devices for connecting two or more unprepared rigid and/or flexible copper conductors having a cross-sectional area of 0,5 mm2 up to and including 16 mm2 and complying with IEC 60228, the total cross-sectional area of the connected conductors not exceeding 35 mm2. It covers low voltage circuits up to 1 000 V a.c. and 1 500 V d.c. where…
Delay and power calculation standards - Part 3: Standard Delay Format (SDF) for the electronic desig...
The Standard Delay Format (SDF)is an existing OVI standard for the representation and interpretation of timing data for use at any stage of the electronic design process.The ASCII data in the SDF le is represented in a tool and language independent way and includes path delays,timing constraint values,inter-connect delays and high level technology parameters. This standard is published with a…
Road vehicles — Tachograph systems — Part 4: CAN interface
ISO 16844-4:2004 specifies the CAN (controller area network) interface for the interchange -- performed in accordance ISO 16844-6 -- of digital information between a road vehicle's tachograph system and vehicle units, and within the tachograph system itself. It specifies parameters of, and requirements for, the physical and data link layers of the electrical connection used in the electronic…
Petroleum and natural gas industries — Rotary drilling equipment — Part 1: Rotary drill stem element...
ISO 10424-1:2004 specifies requirements for the following drill stem elements: upper and lower kelly valves; square and hexagonal kellys; drill stem subs; standard steel and non-magnetic drill collars; drilling and coring bits.
ISO 10424-1:2004 is not applicable to drill pipe and tool joints, rotary shouldered connection designs, thread gauging practice, or grand master, reference master and…
This CSA Standard is a Tri-National standard, with NMX-J-548-ANCE-2004 and UL 486C.
1 Scope
1.1 This Standard applies to hand- or tool-applied splicing wire and cable connectors intended for use with all alloys of copper or aluminum conductors, or both, in accordance with the Canadian Electrical Code Part I, C22.1, in Canada, the National Electrical Code, NFPA-70, in the United States of…
Electrical Safety and Essential Electrical Systems in Health Care Facilities
1 Scope
1.1 General
1.1.1 Application
This Standard deals with the following subjects:
(a) electrical safety associated with health care provision;
(b) electrical installations for health care facilities; and
(c) essential electrical systems for health care facilities.
Note: See Clause 3 for the definition of "health care facility".
1.1.2 Exclusions
1.1.2.1
This…
1 Scope
1.1
This Standard applies to complete, vent- (flue-) connected, oil-fired warm air appliances, irrespective of
the heating capacity or the type of burner used.
1.2
This Standard applies to appliances
(a) intended for installation with the base of the appliance placed on the floor;
(b) intended to be used with pipes or ducts for the distribution of the heated air; and
(c)…
