Rechercher

ISO 2380-1:2004 specifies the shape/form, dimensions and designation of the tips of hand- and machine-operated screwdrivers for slotted-head screws. It also gives the technical specifications and test conditions for the screw-drivers and, in the case of hand-operated screwdrivers, specifies the test torque which the blade-to-handle connection shall withstand.

This National Standard of Canada is equivalent to International Standard ISO/IEC 17878:2003. 1 Scope This International Standard specifies the signalling protocol for the support of the Private User Mobility call handling additional network features (ANF-PUMI and ANF-PUMO) at the Q reference point between Private Integrated services Network eXchanges (PINX) connected together within a Private…

This National Standard of Canada is equivalent to International Standard ISO/IEC 21992:2003. 1 Scope This International Standard specifies functions for using a packet network that uses the Internet Protocol (IP) as its network layer protocol and UDP and TCP as its transport layer protocols, to interconnect two Private Integrated services Network eXchanges (PINXs) forming part of a Private…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 12062-6:2003. 1 Scope 1.1 General This part of ISO/IEC ISP 12062 covers access to a message store (MS) in an Interpersonal Messaging (IPM) environment using the P7 MS 94 Access Protocol (see also figure 1), as defined in ISO/IEC 10021-5:1994 and ISO/IEC 10021-6:1996. These specifications form part of…

This CSA Standard is Joint with UL 1598. 1 Scope 1.1 This Standard applies to luminaires for use in non-hazardous locations and that are intended for installation on branch circuits of 600 V nominal or less between conductors in accordance with the Canadian Electrical Code, Part I (CEC), CSA C22.1, with the U.S. National Electrical Code (NEC), ANSI/NFPA 70, and with the Mexican National…

1 Scope 1.1 General 1.1.1 This Standard applies to occupational diving operations conducted in connection with all types of work and employment, and describes the requirements for occupational safety. Note: It is recognized that certain underwater tasks may require specialized standards of practice and/or operational techniques that differ from the requirements of this Standard yet may be…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10611-6:2003. 1 Scope 1.1 General This part of ISO/IEC ISP 10611 covers access to a message store (MS) using the P7 MS Access Protocol as defined in ISO/IEC 10021-5:1994 and ISO/IEC 10021-6:1996 (see also figure 1). These specifications form part of the Common Messaging application functions, as defined…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15772:2003. 1 Scope This International Standard specifies the signalling protocol for the support of the Common Information additional network feature (ANF-CMN) at the Q reference point between Private Integrated services Network eXchanges (PINX) connected together within a Private Integrated Services Network (…

This National Standard of Canada is equivalent to International Standard ISO/IEC 9314-20:2001. 1 Scope This part of ISO/IEC 9314 specifies a series of tests in order to verify conformance of FDDI stations to the requirements of ISO/IEC 9314-3:1990. NOTE ISO/IEC 9314-3 specifies the requirements for the optical input/output port of FDDI stations as well as for cable plants. It states that a bit…

Scope 1.1.1 This standard applies to newly produced outdoor specialty gas appliances (see Part IV,Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials. Appliances submitted for examination under this standard shall be classified as portable. These products are not intended for commercial use. 1.1.2 This standard does not apply to…