1 Scope
1.1
This Standard applies to fans and ventilation equipment that is
(a) cord-connected, rated at not more than 250 V;
(b) permanently-connected to supply circuits of 600 V and less, single-phase or three-phase;
(c) used in non-hazardous locations;
(d) used in household, commercial, agricultural, or industrial locations;
(e) used indoors or outdoors; and
(f) used in accordance with the…
Pressure regulators for use with medical gases — Part 2: Manifold andline pressure regulators
1 Scope
1.1* This part of ISO 10524 specifies requirements for manifold pressure regulators (as defined in 3.6)
intended to be connected to cylinders with nominal filling pressures up to 25 000 kPa at 15 °C and for line
pressure regulators (as defined in 3.4) for inlet pressures up to 3 000 kPa and intended for use in pipeline
systems for the following medical gases:
- oxygen;
- nitrous…
Pressure regulators for use with medical gases — Part 1: Pressureregulators and pressure regulators ...
1 Scope
1.1 This part of ISO 10524 is applicable to the types of pressure regulators listed in 1.3 intended for the
administration of the following medical gases in the treatment, management, diagnostic evaluation and care of
patients:
- oxygen;
- nitrous oxide;
- air for breathing;
- helium;
- carbon dioxide;
- xenon;
- mixtures of the gases listed above;
- air for driving surgical…
Anaesthetic and respiratory equipment — Laryngoscopes for tracheal intubation
1 Scope
This International Standard gives general requirements for laryngoscopes used for intubation, and specifies
critical dimensions for the handle and lamp of hook-on type laryngoscopes. It also addresses the
interchangeability of blades and handles.
It is applicable only to instruments with an internal battery-operated power source for illuminating the larynx,
since electrical safety…
Flow-metering devices for connection to terminal units of medical gas
pipeline systems
1 Scope
1.1 This International Standard is applicable to:
- flow-metering devices that are connected, either directly or by means of flexible connecting assemblies,
and disconnected by the operator at terminal units of a medical gas pipeline system for flow adjustment,
measurement and delivery of medical gases;
- flow-metering devices that are connected and disconnected by the operator at gas-…
Pressure regulators for use with medical gases — Part 4:
Low-pressure regulators
1 Scope
1.1 This part of ISO 10524 applies to the types of low-pressure regulators listed in 1.2 and intended to be
used with the following medical gases in the treatment, management, diagnostic evaluation and care of
patients:
- oxygen;
- nitrous oxide;
- medical air;
- helium;
- carbon dioxide;
- xenon;
- specified mixtures of the gases listed above;
- air for driving surgical tools;
- nitrogen…
Conveyor belts — Determination of strength of mechanical fastenings — Static test method
ISO 1120:2012 specifies a static test method for measuring the strength of a conveyor belt mechanical fastening; the mechanical joints can be either of the type employing a connecting rod or of a type which does not employ a connecting rod.
Railway applications - Electronic equipment used on rolling stock
IEC 60571:2012 covers the conditions of operation, design, construction, and testing of electronic equipment, as well as basic hardware and software requirements considered necessary for competent, reliable equipment. Applies to all electronic equipment for control, regulation, protection, supply, etc., installed on rail vehicles and associated with: either the accumulator battery of the vehicle…
Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - P...
IEC 60947-5-2:2007+A1:2012 applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic objects, ultrasonic proximity switches that sense the presence of sound reflecting objects, photoelectric proximity switches that sense the presence of objects and non-mechanical magnetic proximity switches that sense the presence of objects with a magnetic…
Appareillage à basse tension - Partie 5-2: Appareils et éléments decommutation pour circuits de comm...
La CEI 60947-5-2:2007+A1:2012 s'applique aux détecteurs de proximité inductifs et capacitifs qui détectent la présence d'objets métalliques et/ou non métalliques, aux détecteurs de proximité ultrasoniques qui détectent la présence d'objets réfléchissants les ultrasons, aux détecteurs de proximité photoélectriques qui détectent la présence d'objets et aux détecteurs de…
