Household and similar electrical appliances — Safety — Part 2-41:Particular requirements for pumps
1 Scope
[Insert the following sentence at the beginning of Note 101]
This Standard covers both permanently connected and cord-connected pumps.
[Add the following note after Note 101]
Note 101A: In Canada, this Standard does not apply to the swimming pool pumps of the submersible type or the
non-submersible type.
[Add the following]
This Standard applies to the safety of such equipment…
Road vehicles — Tachograph systems — Part 1: Electrical connectors
ISO 16844-1:2013 gives the dimensions and tests and requirements for the performance of electrical connectors needed for ensuring the interchangeability of different components of the tachograph systems used for road vehicles in accordance with Council Regulation (EEC) No. 3821/85 on recording equipment in road transport. In particular, ISO 16844-1:2013 specifies the connectors used to connect…
ISO 2974:2013 specifies the dimensional requirements of end-connections for high-pressure fuel injection equipment components used on diesel (compression-ignition) engines.
It is applicable to externally threaded 60° female cones and intended for use with high-pressure fuel injection pipe assemblies with tube outside diameters of
up to and including 12 mm for integral female cones, and
up to and…
Information technology — Fibre Channel — Part 313: Avionics Environment — Anonymous Synchronous Mess...
ISO/IEC 14165-313:2013(E) defines a set of features necessary to implement a real-time fibre channel network (switched fabric or arbitrated loop) supporting the FC-AE-ASM Upper Level Protocol. Fibre Channel Avionics Environment is a group of protocols and profiles that specify Fibre Channel options for devices connected by fabric and/or loop topologies that are pertinent to their use in…
Communication networks and systems for power utility automation - Part 90-7: Object models for power...
IEC/TR 61850-90-7:2013(E) describes the functions for power converter-based distributed energy resources (DER) systems, focused on DC-to-AC and AC-to-AC conversions and including photovoltaic systems (PV), battery storage systems, electric vehicle (EV) charging systems, and any other DER systems with a controllable power converter. It defines the IEC 61850 information models to be used in the…
Information technology - Fibre channel - Part 313: Avionics environment - Anonymous synchronous mess...
ISO/IEC 14165-313:2013(E) defines a set of features necessary to implement a real-time fibre channel network (switched fabric or arbitrated loop) supporting the FC-AE-ASM Upper Level Protocol. Fibre Channel Avionics Environment is a group of protocols and profiles that specify Fibre Channel options for devices connected by fabric and/or loop topologies that are pertinent to their use in…
Standard for Suspended Ceiling Grid Low Voltage Systems and Equipment
1.1 These requirements cover suspended ceiling grid low voltage systems and equipment intended for
installation and use in accordance with the:
In Canada:
Canadian Electrical Code, Part I, Safety Standard for Electrical Installations, CSA
C22.1,
In the United States:
National Electrical Code (NEC), ANSI/NFPA 70.
1.2 The suspended ceiling grid low voltage systems covered by this standard…
Low-voltage electrical installations - Part 7-713: Requirements for special installations or locatio...
IEC 60364-7-713:2013 applies to the wiring system of furniture (and similar fitments) which is connected to the electrical installation. Examples are beds, cupboards, desks and shop display cases, in which electrical equipment such as luminaires, installation couplers according to IEC 61535, socket-outlets, switching devices and wiring systems are installed. This second edition cancels and…
Plugs, receptacles, and couplers for electric vehicles (Tri-national standard, with UL 2251 and NMX...
Scope
1.1 These requirements cover plugs, receptacles, vehicle inlets, vehicle connectors, and breakaway couplings, rated up to 800 amperes and up to 600 volts ac or dc, intended for conductive connection systems, for use with electric vehicles. These devices are for use in either indoor or outdoor nonhazardous locations in accordance with Annex A, Ref. No. 1.
1.2 This Standard does not directly…
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
IEC 60947-2:2006+A1:2009+A2:2013 applies to circuit-breakers, the main contacts of which are intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.; it also contains additional requirements for integrally fused circuit-breakers. The main changes introduced in this new edition are an amendment to the verification of dielectric properties, the…
