1.1
This Standard applies to power circuit breakers rated 1000 Vac or less nominal, 1058 Vac (RMS) maximum, and 1500 V dc maximum for use in nonhazardous locations in accordance with the Canadian Electrical Code, Part I.
1.2
This Standard applies to power circuit breakers of the following types:
a)
stationary (fixed) mounted or drawout mounted types;
b)
manually operated or power operated…
1.1
This Standard applies to automatically operating gas-fired central furnaces (see Clause 3, Definitions), hereinafter referred to as furnaces, for installation in residential, commercial, and industrial structures including furnaces for direct vent, recreational vehicle, outdoor, and manufactured (mobile) homes. These furnaces may include a cooling unit. All units are to be constructed…
Médecine bucco-dentaire — Dimensions d'accouplement pour pièces à main dentaires
ISO 3964:2016 spécifie l'accouplement entre les pièces à main et les moteurs connectés aux units dentaires.
ISO 3964:2016 spécifie les dimensions nominales, les tolérances et la force d'extraction des systèmes d'accouplement utilisés entre la pièce à main et le moteur qui lui fournissent l'eau, l'air, la lumière et l'énergie de rotation.
Dentistry — Coupling dimensions for handpiece connectors
ISO 3964:2016 specifies the coupling between handpieces and motors connected to dental units.
ISO 3964:2016 specifies the nominal dimensions, tolerances and the extraction force of coupling systems for use between handpiece and motor which supply the handpiece with water, air and light and rotation energy.
Information technology — Security techniques — Information security incident management — Part 2: G...
ISO/IEC 27035-2:2016 provides the guidelines to plan and prepare for incident response. The guidelines are based on the "Plan and Prepare" phase and the "Lessons Learned" phase of the "Information security incident management phases" model presented in ISO/IEC 27035‑1.
The major points within the "Plan and Prepare" phase include the following:
-…
Information technology - Security techniques - Information security incident management - Part 2: G...
ISO/IEC 27035-2:2016 provides the guidelines to plan and prepare for incident response. The guidelines are based on the "Plan and Prepare" phase and the "Lessons Learned" phase of the "Information security incident management phases" model presented in ISO/IEC 27035‑1.
The major points within the "Plan and Prepare" phase include the following:
-…
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and met...
CISPR 25:2016 contains limits and procedures for the measurement of radio disturbances in the frequency range of 150 kHz to 2 500 MHz. The standard applies to any electronic/electrical component intended for use in vehicles, trailers and devices. Refer to International Telecommunications Union (ITU) publications for details of frequency allocations. The limits are intended to provide protection…
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: T...
ISO 14577-4:2016 specifies a method for testing coatings which is particularly suitable for testing in the nano/micro range applicable to thin coatings. However, the application of this method of this part of ISO 14577 is not needed if the indentation depth is such a small fraction of the coating thickness that in any possible case a substrate influence can be neglected and the coating can be…
Earth-moving machinery — Electrical safety of machines utilizing electric drives and related compone...
ISO 14990-2:2016 the particular safety requirements for the electrical equipment and its components incorporated in externally-powered (mains-connected, including machines powered by external dedicated generators), electrically-driven earth-moving machines (EMMs).
It is applicable to those machines using on-board voltages in the range of 50 V?36 kV AC r.m.s. at any frequency and 75 V?36 kV DC ?…
High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Subs...
IEC 62271-212:2016 specifies the service conditions, rated characteristics, general structural requirements and test methods of the assemblies of the main electrical functional units of a high-voltage/low-voltage distribution substation, duly interconnected, for alternating current of rated operating voltages above 1 kV and up to and including 52 kV on the high-voltage side, service frequency 50…
