Animal feeding stuffs — Determination of moisture and other volatile matter content
This International Standard specifies a method for the determination of the moisture and other volatile matter
content of animal feeding stuffs.
The method is applicable to animal feeding stuffs with the exception of:
a) milk products;
b) mineral substances;
c) mixtures containing a considerable amount of milk products or mineral substances, for example milk replacers;
d) animal feeding stuffs…
Petroleum products — Determination of particulate content of middle distillate fuels — Laboratory fi...
This International Standard specifies a method for the determination of the particulate content of middle distillate
fuels with a closed flash point of 38 °C or higher, determined in accordance with ISO 2719, ISO 3679 or ISO 13736.
It is not applicable to light distillate fuels (gasolines) or to aviation fuels.
A gravimetric limitation of the contamination of middle distillate fuels used in…
Information and documentation — Permanence and durability of writing, printing and copying on paper ...
This International Standard specifies requirements and test methods for evaluation of the permanence and
durability of writing, printing and copying on paper stored in libraries, archives and other protected environments for
long periods of time.
It is applicable to
images on paper with the exception of documents within the scope of ISO/TC 42, Photography;
multicoloured images.
The…
Refractory products — Methods of test for ceramic fibre products
This International Standard specifies methods for determining the thickness, bulk density, resilience, permanent
linear change on heating, thermal conductivity, tensile strength and shot content of ceramic fibre products. It applies
to ceramic fibre bulk, blankets, felts, mats, boards, papers and pre-formed shapes with the exception of products
delivered in a wet state.
The application of the…
Binders for paints and varnishes — Determination of the viscosity of industrial cellulose nitrate so...
This International Standard specifies a method of determining the viscosity of industrial cellulose nitrate, usually
referred to as nitrocellulose, the nitrogen content of which can vary between 10,7 % by mass and 12,6 % by mass,
depending on the type.
It also gives a classification system for industrial cellulose nitrate solutions (see annex A) which is based on
viscosity measurements made using…
Animal feeding stuffs — Determination of furazolidone content — Method using high-performance liquid...
This International Standard specifies a high-performance liquid chromatographic (HPLC) method for the
determination of the furazolidone content of premixtures and animal feeding stuffs.
The method is applicable to animal feeding stuffs with a furazolidone content of 25 mg/kg to 5 000 mg/kg and to
premixtures with a mass fraction of furazolidone of up to 20 % [formerly written as 20 % (m/m)].
NOTE…
Water quality — Guidelines for the determination of total organic carbon (TOC) and dissolved organic...
This International Standard gives guidance for the determination of total carbon (TC), total inorganic carbon (TIC) and
total organic carbon (TOC) in drinking water, ground water, surface water, sea water and waste water. It also defines
terms and specifies interferences, reagents, and sample pretreatment for water samples.
The method described in this International Standard applies to water…
Zinc sulfide concentrates — Determination of silver and gold contents — Fire assay and flame atomic ...
This International Standard specifies a fire assay and flame atomic absorption spectrometric procedure for the determination of silver and gold contents of zinc sulfide concentrates.
The method is applicable to the determination of silver and gold in zinc sulfide concentrates containing up to 60 % (m/m) zinc in the form of zinc blende and related materials.
The method is applicable to silver…
This International Standard specifies an acid decomposition, solvent extraction, flame atomic absorption spectrometric procedure for the determination of gold in zinc sulfide concentrates.
The method is applicable to the determination of gold in zinc concentrates containing up to 60 % (m/m) zinc in the form of zinc blende and related materials.
The method is applicable to gold contents from 0,5…