Methods of Testing Pulp and Paper Kappa Number of Pulp
This National Standard of Canada is based on International Standard ISO
302:1981.
1.1 The Kappa number test is used for evaluation of pulps with regard to the
degree of delignification and bleachability.
1.2 The method can be applied to pulps produced in yields up to about 65% and
giving Kappa numbers not higher than 100 on hardwood pulps, and not higher than
120 on softwood pulps (Note 1).…
International Electrotechnical Vocabulary (IEV) - Part 731: Optical fibre communication
The contents of the corrigendum of July 1992 have been included in this copy.
It has the status of a horizontal standard in accordance with IEC Guide 108.
Textile Test Methods Textiles - Determination of pH of the Aqueous Extract
This National Standard of Canada is equivalent to International Standard ISO
3071:1980.
This International Standard specifies a method for determining the pH value of
the aqueous extract of textiles.¹)
The method is applicable to textile in any form (fibres, yarn, fabrics, etc.),
provided that a small representative sample may be obtained which is in, or may
be reduced to, a form which…
Information Technology - Telecommunications and Information Exchange Between Systems - Protocol Comb...
This National Standard of Canada is equivalent to International Standard ISO/IEC 8880-1:1990.
1 Scope
This part of ISO/IEC 8880 specifies the protocol combinations to be used to
support the OSI Network Service defined in ISO 8348 and its Addendum 1. The
field of application of this part of ISO/IEC 8880 is that of the environments
defined in the other parts of ISO/IEC 8880. The field…
Textile Test Methods Textiles - Tests for Colourfastness - Part E03:
Colourfastness to Chlorinated...
This National Standard of Canada is equivalent to International Standard ISo
105-E03:1987.
This part of ISO 105 specifies a method for determining the resistance of the
colour of textiles of all kinds and in all forms to the action of active
chlorine in concentrations such as are used to disinfect swimming-bath water
(break-point chlorination).
Three alternative test conditons are…
Textile Test Methods Wool - Determination of Percentage of Medullated Fibresby the Projection Micro...
This National Standard of Canada is equivalent to International Standard ISO
2647:1973.
This International Standard specifies a method of test for determining the
percentage of medullated wool fibres by means of the projection microscope.
The method is applicable to woollen and worsted products, at all stages, from
raw materials to yarn.
Textile Test Methods Wool - Determination of Alkali Content
This National Standard of Canada is equivalent to International Standard ISO
2916:1975.
This International Standard specifies a method for the determination of the
alkali content of wool.
The method is applicable to undyed wool in any form; for example, loose fibres,
card sliver, tops, yarn or fabric. It can be used with dyed wool if the amount
of dye extracted in the course of the…
Textile Test Methods Wool - Determination of Acid Content
This National Standard of Canada is equivalent to International Standard ISO
3073:1975.
This International Standard specifies a method for determining the acid content
of a wool sample, expressed as a percentage by mass.
This method is applicable to undyed wool in any form, for example loose fibre,
sliver, yarn or fabric. It is also applicable to dyed wool when the amount of
dye…
General Introduction
One of the key requirements before organizations can exchange administrative, commercial and transport information between their computers, without manual intervention, is agreement on the content and structure of the information to be transmitted. In EDIFACT, this is achieved by developing United Nations Standard Electronic Messages (UNSM's), for both national and…
Information Processing - Text and Office Systems - Office Document
Architecture (ODA) and Intercha...
This National Standard of Canada is equivalent to International
Standard ISO 8613-2:1989. The purpose of ISO 8613 is to
facilitate the interchange of documents. This part of ISO 8613
- defines a document architecture intended for representation of
documents;
- defines a document processing model;
- defines the document structures, the basic constituents of the
architecture and a…