Sodium and potassium silicates for industrial use — Determination of carbonates content — Gas-volume...
Three cases, defined by a preliminary test, are envisaged: silicates containing neither sulphides nor chlorates; silicates containing sulphides; silicates containing chlorates. The method based on boiling of an acidified test portion containing methyl orange and with a lead paper strip in the vapour. The presence of sulphides produces blackening of the paper and the presence of chlorates…
Aluminium alloys — Determination of zinc — EDTA titrimetric method
The method is applicable to alloys not containing cadmium and having zinc contents between 0,10 and 12,0 % (m/m). Specifies principle and procedure of the method, the reagents, apparatus, sampling, expression of results and test report.
Anhydrous hydrogen fluoride for industrial use — Determination of hexafluorosilicic acid content — R...
Applicable to products having H2 SiF6 contents between 0.01 % (m/m) and 0.2 % (m/m). Gives introductory instructions to the risk in handling with the product. The principle of analysis consists in formation of oxidized molybdosilicate (yellow) in weakly acid medium in the presence of boric acid to suppress interference by fluorine. Selective reduction of this complex after addition of sulphuric…
Anhydrous hydrogen fluoride for industrial use — Determination of sulphur dioxide content — Iodometr...
Applicable to products having SO2 contents between 0.002 % (m/m) and 0.20 % (m/m). The principle consists in addition of a measured volume of iodine solution to a test portion. Back-titration of the excess iodine using a standard volumetric sodium thiosulphate solution and calculation of the SO2 content from the amount of iodine used.
Potassium hydroxide for industrial use — Determination of calcium content — EDTA (disodium salt) co...
The method is applicable to products having a calcium content equal to or greater than 0.002 % (m/m). The principle consists in titration of the calcium with a standard volumetric solution of the disodium salt of (ethylenedinitrilo)tetraacetic acid (EDTA disodium salt) in the presence of 2,2'-(ethylenedinitrilo)diphenol Äglyoxal-bis-(2-hydroxyanil)Ü as indicator, after elimination of…
Sodium hydroxide for industrial use — Determination of calcium content — EDTA (disodium salt) compl...
The method is applicable to products having a calcium content equal to or greater than 0.002 % (m/m). The principle consists in titration of the calcium with a standard volumetric solution of the disodium salt of (ethylenedinitrilo)tetraacetic acid (EDTA disodium salt) in the presence of 2,2'-(ethylenedinitrilo)diphenol Äglyoxal-bis-(2-hydroxyanil)Ü as indicator, after elimination of…
The method is applicable to alloys having insoluble zirconium contents between 0,02 and 0,3 %. Rare earths, thorium and silver do not interfere. Specifies principle and procedure of the method, reagents, apparatus, sampling, expression of results and test report.
Sodium fluoride for industrial use — Preparation and storage of test samples
Relates to crude samples intended for the determination of moisture content and dried samples for chemical tests. Processing by grinding and sieving until the sample passes completely through a sieve of mesh aperture 0.125 mm. Thoroughly mixing and drying and storing in a tightly closed container.
Fibre building boards — Determination of sand content
The purpose of the method specified is to obtain an indication of machinability by cutting tools. The principle is based on the complete combustion of test pieces and weighing the sand remaining in the desiccator at the end of the procedure. The tubular hearth used to ignite the test pieces is shown in the figure.
