Definitions are given for certain of the terms concerning steel wire ropes. The classification system used is shown by the contents list, and an alphabetical index is provided for detailed reference.
Anhydrous hydrogen fluoride for industrial use — Sampling
This part contains a method for taking laboratory samples intended for the determination of the water content and the preparations of the test samples. Contains instructions for handling with the material. Applicable for taking samples of this highly corrosive liquid from road and rail tanks, drums and cylinders. The principle consists in allowing the liquid of one of these containers to flow in…
Anhydrous hydrogen fluoride for industrial use — Determination of non-volatile acid content — Titrim...
Applicable to contents of between 0.005 % (m/m) and 0.3 % (m/m) expressed in sulphuric acid. Preparation of the samples according to ISO 3137. Removal of volatile acids by evaporation and titration of the remaining acidity with standard volumetric sodium hydroxide solution in the presence of phenolphthalein as indicator. The evaporation is carried out on a boiling water bath in a fume cupboard.
Carbon disulphide for industrial use — Sampling and methods of test
Specifies also the determination of density at 20 0C and the measurement of colour in Hazen units. Details the determination of distillation characteristics, residue on evaporation and inorganic sulphur content. Has also been approved by the IUPAC.
Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of orthophosphat...
Specifies a photometric method, using the reduced molybdophosphate, for the determination of orthophosphate content of sodium tripolyphosphate and sodium pyrophosphate for industrial use. Applicable to products with orthophosphate contents between 0,05 and 1,0 % (m/m).
Sodium pyrophosphate for industrial use — Estimation of pyrophosphate content — Potentiometric metho...
Applicable to products containing at least 90 % (m/m) of tetrasodium pyrophosphate and in the absence of more condensed forms of phosphates. The reaction based on conversion of tetrasodium pyrophosphate to disodium dihydrogenpyrophosphate by addition of hydrochloric acid. Introduction of zinc sulfate in solution for precipitation of zinc pyrophosphate and formation of sulphuric acid.…
Sodium tripolyphosphate for industrial use — Estimation of tripolyphophate content — Tris(ethylenedi...
Not applicable in the presence of metaphosphate. The presence of pyrophosphate at normal concentrations Ämaximum 6 % (m/m)Ü does not interfere. The principle consists in precipitation of tripolyphosphate as its complex with tris(ethylenediamine) cobalt(III) chloride at a pH of between 3 and 4 in a buffered medium. Filtration, washing, drying and weighing of the precipitate. Details the…
Sodium hydroxide for industrial use — Determination of iron content — 1,10- Phenanthroline photometr...
Specifies a method that is more sensitive and more widely used than the 2,2'-bipyridyl method. It is applicable to products having iron contents equal to or greater than 0.5 mg/kg. The principle is based on the reduction of trivalent iron by hydroxylammonium chloride, formation of a bivalent iron/1,10-phenanthroline complex in a buffered system. Photometric measurement of the coloured…
Sodium hydroxide for industrial use — Determination of silica content — Reduced silico-molybdic comp...
The method is applicable to products having silica contents exceeding 10 mg/kg. The principle is based on the formation of yellow oxidized silico-molybdic complex in a strongly acid medium, in the presence of boric acid to suppress interference by fluorides. Selective reduction of this complex with a mixture of aminonaphtholsulphonic acid (4-amino-3-hydroxynaphthalene-1-sulphonic acid), sodium…
