Textile Test Methods Quantitative Analysis of Fibre Mixtures - Binary
Mixtures Containing Certain...
Describes a procedure for the quantitative analysis of binary
mixtures of certain spandex fibres with nylon 6, nylon 6,6,
viscose and acrylic fibres by removal of the spandex component.
Methods of measurement on radio receivers for various classes of emission. Part 1: General considera...
Applies to radio receivers of any kind excluding television receivers, and to the parts of which they are composed, or which are used as auxiliaries to such receivers. Deals with the determination of performance, the comparison of equipment and the determination of proper practical applications by listing the characteristics useful for specifications and laying down uniform methods of measurement…
Ethylene for industrial use — Determination of traces of polar compounds — Preparation of condensate...
Specifies a method of sampling by scrubbing at dry ice temperature (195 K). Permits the concentration of traces of all the less volatile polar compounds (water, alcohols, esters, acids, amines, etc.) in a small amount of liquid phase practically without any interference due to adsorption phenomena on the relatively small internal surfaces of the scrubbing absorber. This sampling technique permits…
The method consists in extraction by shaking with dimethylformamide, then after centrifuging, addition of ferric ammonium citrate and ammonia to an aliqiot part of the supernatant liquid and spectrometric determination, at 525 nm, of the absorbance of the solution thus obtained, and determing of the tannic content using a calibration curve prepared using tannic acid.
Steel and iron — Determination of nickel content — Gravimetric or titrimetric method
The method is applicable to nickel contents between 0.5 % (m/m) and 30 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. Annex A gives additional information on the international co-operative tests, and Annex B represents the precision data graphically.
Steel and iron — Determination of vanadium content — N-BPHA spectrophotometric method
The method is applicable to vanadium contents between 0.005 % (m/m) and 0.50 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. Annex A gives additional information on the international co-operative tests. Annex B includes the graphical representation of precision data.
