Rechercher

Specifies a method for the laboratory determination. The precision data of this procedure have only been determined for water contents up to 1 % (V/V). Includes principle, apparatus, reagents, sampling, procedure, expression of results, precision and test report. A centrifuge tube is shown in figure 1. The procedure for reading the volume of water and sediment is shown in figure 2. The precision…

This determination may be required for the calculation of the dry mass used in analytical methods. Applies only to products with a moisture content of not more than 10 %. The principle consists in drying a test portion at 105 ° centigrade in a thermostatic oven, then weighing. The moisture content is calculated from the loss of mass of the test portion. Cancels and replaces the first edition ISO…

Gives a precise and accurate gravimetric method for determining the uranium content. Non-volatile impurities influence the accuracy of the method. Specifies principle, interferences, reagents, apparatus, procedure, expression of results and test report.

The method is applicable to cobalt contents between 0,01 % (m/m) and 4 % (m/m). The general requirements concerning the apparatus, sampling, dissolution of the test sample, atomic absorption measurements, calculations and test report are given in ISO 7530-1. Specifies principle, reagents, apparatus, sampling and sample preparation, procedure, expression of results and test report.

The method is applicable to chromium contents between 0,01 % (m/m) and 4 % (m/m). The general requirements concerning the apparatus, sampling, dissolution of the test sample, atomic absorption measurements, calculations and test report are given in ISO 7530-1. Specifies principle, reagents, apparatus, sampling and sample preparation, procedure, expression of results and test report.

The method is applicable to copper contents between 0,01 and 4 % (m/m). The general requirements concerning the apparatus, sampling, dissolution of the test sample, atomic absorption measurements, calculations and test report are given in ISO 7530-1. Specifies principle, reagents, apparatus, sampling and sample preparation, procedure, expression of results and test report.

The method is applicable to iron contents between 0,01 and 4 % (m/m). The general requirements concerning the apparatus, sampling, dissolution of the test sample, atomic absorption measurements, calculations and test report are given in ISO 7530-1. Specifies principle, reagents, apparatus, sampling and sample preparation, procedure, expression of results and test report.

The method is applicable to manganese contents between 0,01 % (m/m) and 4 % (m/m). The general requirements concerning the apparatus, sampling, dissolution of the test sample, atomic absorption measurements, calculations and test report are given in ISO 7530-1. Specifies principle, reagents, apparatus, sampling and sample preparation, procedure, expression of results and test report.

Specifies the format characteristics of Eurobonds, for example, physical representation with regard to size, paper, printing, layout and contents. This second edition cancels and replaces the first edition (1985).

Based on international trade practices followed by the major exporting/importing countries. Specifies requirements for products, in the shell or in the form of kernels, for human consumption or for oil milling. Gives definitions for pods/kernels which are shown in a table. The determination of moisture content is carried out according to the method specified in ISO 1026.