Rechercher

Subscribe to IEC 60061 Database to access the full and updated content of the series.

Establishes classes of environmental parameters and their severities, covering the extreme (short-term) conditions to which a product may be subjected when being transported, installed, stored and used. Separate groups of classes are given for different product applications. The contents of the corrigendum of December 1985 have been included in this copy. This consolidated version consists of the…

Classifies groups of environmental parameters and their severities to which products are subjected when mounted for stationary use at weatherprotected locations. This consolidated version consists of the second edition (1994), its amendment 1 (1995) and its amendment 2 (1996). Therefore, no need to order amendments in addition to this publication. The contents of the corrigendum of June 2008 have…

ISO 15009:2002 specifies a method for quantitative gas-chromatographic determination of volatile hydrocarbons, naphthalene and volatile halogenated hydrocarbons in soil. ISO 15009:2002 is applicable to all types of soil. Under the conditions specified in ISO 15009:2002, the following limits of determinations apply (expressed on basis of dry matter): volatile hydrocarbons and naphthalene: 0,1 mg/…

ISO 2929:2002 specifies the requirements for two groups of rubber hoses and rubber hose assemblies for loading and discharge of liquid hydrocarbon fuels with a maximum working pressure of 10 bar (1,0 MPa). Both groups of hoses are designed for: use with hydrocarbon fuels having an aromatic-hydrocarbon content not exceeding 50 % by volume and containing up to 15 % of oxygenated compounds;operation…

ISO 6974-6:2002 describes a gas chromatographic method for the quantitative determination of the content of helium, hydrogen, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons in natural gas samples using three capillary columns. This method is applicable to the determination of these gases within the mole fraction ranges varying from 0,000 1 % to 40 %, depending on the component…

ISO 18413 specifies the content of an inspection document that includes both the cleanliness requirement for the specified part or component and the inspection method to be used for evaluating its cleanliness level. The cleanliness requirement and inspection method shall be established and agreed upon by the parties involved. ISO 18413 is applicable to the wetted surfaces of any fluid power…

Deals with the safety of electric water-bed heaters and associated control units, their rated voltage being not more than 250 V, for household and similar purposes. Appliances intended to be used in hotels, are also within the scope of this standard. The contents of the corrigendum of July 2004 have been included in this copy.

Deals with the safety of electric water-bed heaters and associated control units, their rated voltage being not more than 250 V, for household and similar purposes. Appliances intended to be used in hotels, are also within the scope of this standard. The contents of the corrigendum of July 2004 have been included in this copy.

In ISO 13520 procedures are covered for estimating ferrite content in certain grades of austenitic iron-chromium-nickel alloy castings that have compositions balanced to create the formation of ferrite as a second phase in amounts controlled within specified limits. Methods are described for estimating ferrite content by chemical, magnetic and metallographic means.