Rechercher

This International Standard deals with safety aspects of power transformers, power supplies, reactors and similar products such as electrical, thermal and mechanical safety. This standard covers the following types of dry-type transformers, power supplies, including switch mode power supplies, and reactors, the windings of which may be encapsulated or non-encapsulated It has the status of a group…

Deals with the safety of flexible sheet heating elements. These are incorporated into a building to heat rooms. The rated voltage is less than 250 V for single-phase installations and 480 V for other installations. For heated blankets and pads, see IEC 60335-2-17. For heated mats and foot warmers, see IEC 60335-2-81. This standard does not cover under-carpet heaters, nor flexible heating elements…

Applicable to industrial electroslag remelting furnaces having one or more electrodes and having different melting power supplies, such as alternating current, direct current, or low-frequency current. Standardizes electroslag remelting furnace test conditions and methods to determine the main parameters and technical characteristics. The contents of the corrigendum of December 2008 have been…

ISO 11114-4:2005 specifies test methods and the evaluation of results from these tests in order to qualify steels suitable for use in the manufacture of gas cylinders (up to 3 000 l) for hydrogen and other embrittling gases. ISO 11114-4:2005 only applies to seamless steel gas cylinders. The requirements of ISO 11114-4:2005 are not applicable if at least one of the following conditions for the…

ISO 6750:2005 specifies the content and gives guidance on the format of operator's manuals for earthmoving machinery as defined in ISO 6165. It is intended to assist manufacturers of the machinery in the drafting and presentation of these manuals.

ISO/IEC 18013-1:2005 establishes the design format and data content of an ISO-compliant driving licence (IDL) with regard to the human-readable (visual) features and the placement of ISO machine-readable technologies on the card. It creates a common basis for international use and mutual recognition of the IDL without restricting individual domestic or regional driver licensing authorities from…

ISO/IEC 18013-1:2005 establishes the design format and data content of an ISO-compliant driving licence (IDL) with regard to the human-readable (visual) features and the placement of ISO machine-readable technologies on the card. It creates a common basis for international use and mutual recognition of the IDL without restricting individual domestic or regional driver licensing authorities from…

ISO 7225:2005 specifies the design, content (i.e. hazard symbols and text) and application of precautionary labels intended for use on individual gas cylinders containing single gases or gas mixtures. Labels for cylinders of bundles and labels for bundles are not covered by ISO 7225:2005.

establishes a method to predict the noise generated in a control valve by liquid flow and the resulting noise level measured downstream of the valve and outside of the pipe. The contents of the corrigendum of February 2006 have been included in this copy.

Gives guidance for the choice of test criteria for the determination of thermal endurance characteristics. It includes a list of existing published procedures which is however not exhaustive. The main changes from the previous edition are as follows: - editorial, - Table 1 has been actualized essentially by Part 3 sheets of SC 15C publications. The content of the corrigendum 1 (2024-09) has been…