Rechercher

This National Standard of Canada is based on International Standard CEI/IEC 60079-0:2004. 1 Scope This part of IEC 60079 specifies the general requirements for construction, testing and marking of electrical apparatus and Ex components intended for use in explosive gas atmospheres. Unless modified by one of the parts in the IEC 60079 series, electrical apparatus complying with this…

1 Scope 1.1 This Standard specifies test criteria for evaluating the following characteristics of single-use and reusable medical sharps containers for biohazardous and cytotoxic waste: (a) materials of construction; (b) colour; (c) lifespan of reusable containers; (d) puncture resistance; (e) fill capacity and fill capacity indicator; (f) overfill protection; (g) needle unwinders; (h) handle…

This CSA Standard is based on NIST (National Institute of Standards and Technology) Voluntary Product Standard PS 2, Performance Standard for Wood-Based Structural-Use Panels (December 2004). 1. SCOPE 1.1. This Voluntary Product Standard primarily establishes structural criteria for assessing the acceptability of wood-based structural-use panels for construction sheathing and single-floor…

Specifies oil-sampling procedures, analysis requirements and procedures, and recommends sensitivity, repeatability and accuracy criteria for the application of dissolved gas analysis (DGA) to factory testing of new power transformers, reactors and instrument transformers filled with mineral insulating oil when DGA testing has been specified. The most effective and useful application of DGA…

Deals with the safety of heating units to heat the room in which they are located and that are intended to be installed directly under a floor covering that is itself intended to be removable; their rated voltage being not more than 250 V for single-phase installations and 480 V for other installations. The contents of the…

Applies to controllers and starters, which may include a series mechanical switching device, intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. The contents of the corrigendum of March 2002 have been included in this copy. This consolidated version consists of the second edition (1999), its amendment 1 (2001) and its amendment 2 (2006). Therefore, no…

applies to low-frequency cables and wires for telecommunication and gives a general method for calculating the resistance of copper conductors. includes the following significant technical change with respect to the previous edition: improvement of the calculation method of the resistance of copper conductors. The contents of the corrigendum of February 2012 have been included in this copy.

ISO 663:2007 specifies a method for the determination of the insoluble impurities content of animal and vegetable fats and oils. If it is not desired to include soaps (particularly calcium soaps) or oxidized fatty acids in the insoluble impurities content, it is necessary to use a different solvent and procedure.

ISO 10835:2007 gives the underlying theory,the basic principles for sampling and preparation of samples, andthe basic requirements for the design, installation and operation of sampling systems, for mechanical sampling, manual sampling and preparation of samples taken from a lot under transfer, to determine the chemical composition, moisture content and physical properties of the lot. The…

ISO 1138:2007 specifies three methods for the determination of the total sulfur in all types of carbon black for use in the rubber industry: Method A, using an oxygen bomb calorimeter; Method B, using a combustion furnace; Method C, using an automatic analyser. With respect to safety aspects and test precision, it is preferable to use automatic systems. Classical chemical analysis (Method A…