Rechercher

ISO 659:2009 specifies a reference method for the determination of the hexane extract (or light petroleum extract), called the “oil content”, of oilseeds used as industrial raw materials. The procedure for sunflower seed is different from those for other seeds as it includes an additional moisture content determination after the seed has been ground to prepare the test sample. The method has been…

ISO/TR 834-2:2009 establishes general principles for measuring the uniformity of furnace exposure of samples tested in accordance with the requirements of ISO 834-1. ISO/TR 834-2:2009 specifies the type and location of instrumentation used to measure the temperature, velocity and oxygen content near the surface of simulated test samples. The surface of the simulated sample facing the furnace is…

SO 9682-1:2009 specifies a flame atomic absorption spectrometric method for the determination of the mass fraction of manganese in iron ores. This method is applicable to a mass-fraction range of 0,01 % to 2,5 % of manganese in natural iron ores, iron ore concentrates and agglomerates, including sinter products.

IEC 61754-15:2009 defines the standard interface dimensions for the type LSH family of connectors. The main changes with regard to the previous edition are to reconsider the figures and the dimensions of the interface. The contents of the corrigendum of January 2014 have been included in this copy.

IEC 61754-15:2009 defines the standard interface dimensions for the type LSH family of connectors. The main changes with regard to the previous edition are to reconsider the figures and the dimensions of the interface. The contents of the corrigendum of January 2014 have been included in this copy.

ISO/TR 12773-1:2009 is based on a comprehensive review of a series of initiatives and implementations worldwide that for the purposes of this Technical Report are collectively called health summary records (HSRs). Project sponsors and/or authorities were contacted as needed to gather additional information and clarify questions or issues arising out of the review. ISO/TR 12773-1:2009 defines and…

IEC 60947-2:2006+A1:2009 applies to circuit-breakers, the main contacts of which are intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.; it also contains additional requirements for integrally fused circuit-breakers. The main changes introduced in this new edition are an amendment to the verification of dielectric properties, the…

ISO 5983-2:2009 specifies a method for the determination of nitrogen content of animal feeding stuffs according to the Kjeldahl method, and a method for the calculation of the crude protein content. It is suitable for use as a semi-micro rapid routine method using block digestion, copper catalyst, and steam distillation into boric acid. The method is applicable to the determination of greater…

ISO 287:2009 specifies an oven-drying method for the determination of the moisture content of a lot of paper and board. ISO 287:2009 is applicable to every type of lot of paper and board, including corrugated board and solid board, provided that the paper or board does not contain any substances, other than water, that are volatile at the temperature specified in ISO 287:2009. For the…

ISO 3082:2009 gives a) the underlying theory, b) the basic principles for sampling and preparation of samples, and c) the basic requirements for the design, installation and operation of sampling systems for mechanical sampling, manual sampling and preparation of samples taken from a lot under transfer, to determine the chemical composition, moisture content, size distribution and other…