Rechercher

ISO 15031-5:2011 is intended to satisfy the data reporting requirements of On-Board Diagnostic (OBD) regulations in the United States and Europe, and any other region that may adopt similar requirements in the future. ISO 15031-5:2011 specifies: - message formats for request and response messages, - timing requirements between request messages from external test equipment and response messages…

ISO/IEC 14443-3:2011 describes: polling for proximity cards or objects (PICCs) entering the field of a proximity coupling device (PCD); the byte format, the frames and timing used during the initial phase of communication between PCDs and PICCs; the initial Request and Answer to Request command content; methods to detect and communicate with one PICC among several PICCs (anticollision); other…

ISO/IEC 14443-3:2011 describes: polling for proximity cards or objects (PICCs) entering the field of a proximity coupling device (PCD); the byte format, the frames and timing used during the initial phase of communication between PCDs and PICCs; the initial Request and Answer to Request command content; methods to detect and communicate with one PICC among several PICCs (anticollision); other…

IEC 60050-113:2011 gives the general terminology on physical concepts used in the fields of electricity, electronics and telecommunications. Its target is to collect the most usual concepts in space and time, macroscopic physics, mechanics, thermodynamics, particle physics, and solid-state physics, and to present them as terms and descriptions given in logical order according to their…

ISO 80601-2-12:2011 applies to the basic safety and essential performance of a ventilator in combination with its accessories, hereafter referred to as me equipment: intended to be attended by a professional operator for those patients who are dependent on mechanical ventilation; and intended for use in critical care environments in a professional healthcare facility or intended for use in…

ISO 20884:2011 specifies a wavelength-dispersive X-ray fluorescence (WDXRF) test method for the determination of the sulfur content of liquid, homogeneous automotive fuels from 5 mg/kg to 500 mg/kg, which have a maximum oxygen content of 3,7 % (m/m). This product range covers diesel fuels containing up to about 10 % (V/V) fatty acid methyl ester (FAME) and motor gasolines containing up to about…

1 Scope 1.1 Facilities 1.1.1 Types of facilities 1.1.1.1 This Standard addresses the design and operation of effluent monitoring programs for Class I nuclear facilities and uranium mines and mills. These facilities include (a) nuclear reactors; (b) uranium mines, mills, refineries, and conversion plants; (c) uranium fuel fabrication plants; (d) isotope processing facilities; (e…

IEC 60947-1:2007+A1:2010 is to harmonize as far as practicable all rules and requirements of a general nature applicable to low-voltage switchgear and controlgear in order to obtain uniformity of requirements and tests throughout the corresponding range of equipment and to avoid the need for testing to different standards. It bears the edition number 5.1. The technical content is therefore…

IEC 61000-4-4:2004+A1:2010 Establishes a common and reproducible reference for evaluating the immunity of electrical and electronic equipment when subjected to electrical fast transient/bursts on supply, signal, control and earth ports. The test method documented in this part of IEC 61000-4 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon…

IEC 62384:2006+A1:2009 specifies performance requirements for electronic control gear for use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz with an output frequency which can deviate from the supply frequency, associated with LED modules according to IEC 62031. Control gear for LED modules specified in this standard are designed to provide constant voltage or…