This document specifies four methods for the determination of the content of the following groups of organic peroxides used as rubber vulcanizing agents. There are three titration methods and one gas-chromatography method.
a) titration method A for group a: Peroxyketals:
1,1-Di(tert-butylperoxy)cyclohexane (DTBPC; CAS Registry Number®:3006-86-8)
1,1-Di(tert-butylperoxy)-2-methylcyclohexane…
Welding consumables — Covered electrodes for manual metal arc welding of stainless and heat-resistin...
This document specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other electrode properties, and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for manual metal arc welding of stainless and heat-resisting steels.
This document is a combined standard providing…
1 Scope
1.1
This Standard applies to deadfront indoor enclosed and outdoor enclosed assemblies of switchgear devices such as
a)
switches;
b)
interrupting devices;
c)
air circuit breakers;
d)
power circuit breakers; and
e)
control, metering, protective, and regulating equipment with associated interconnections and supporting structures.
1.2
This Standard covers equipment with a…
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -...
IEC 61300-2-38:2023 is available as IEC 61300-2-38:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61300-3-38:2023 presents two methods for testing the sealing performance of a fibre optic sealed closure and hardened connector using air pressure. This third edition cancels and…
Welding consumables — Covered electrodes for manual metal arc welding of nickel and nickel alloys — ...
This document prescribes requirements for the classification of nickel and nickel-alloy covered electrodes for manual metal arc welding and overlaying. The classification of the covered electrodes is based on the chemical composition of their deposited all-weld metal. It includes those compositions in which the nickel content exceeds that of any other element.
Nanotechnologies — Multiwall carbon nanotubes — Determination of carbon impurity content by thermogr...
This document specifies a mild oxidation method to determine the content of carbon impurities (carbon material content not in the form of CNT, including amorphous carbon and trace amountd of other types of structured carbon) less stable than multiwall carbon nanotubes (MWCNTs) by thermogravimetric analysis (TGA) under carbon dioxide atmosphere.
This document is applicable to the characterization…
Fertilizers, soil conditioners and beneficial substances — Determination of ammonium citrate, disodi...
This document specifies an inductively coupled plasma-optical emission spectrometer (ICP-OES) method for the determination of the ammonium citrate, disodium-etheylenediamine tetraacetic acid (EDTA) soluble phosphorus and potassium content in fertilizer extract solutions.
This document is applicable to all inorganic fertilizer products, whether compound or complex fertilizer products or blends…
Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
IEC 60793-1-44:2023 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 60793-1-44:2023 edition 3.0 and the previous IEC 60793-1-44:2011 edition 2.0. Furthermore, comments from IEC SC 86A experts are provided to explain the reasons of the most relevant changes, or to clarify any part…
Portable residual current devices (PRCDs) without integral overcurrent protection for household and ...
IEC 61540:2023 applies to portable residual current devices (PRCDs) for household and similar uses, consisting of a plug, a residual current device (RCD) and one or more socket-outlets or a provision for connection. They do not incorporate overcurrent protection. They are intended for single- and two-phase systems for rated currents not exceeding 16 A for rated voltages not exceeding 250 V AC, or…
Systems and software engineering — Life cycle management — Part 6: System and software integration
This document:
— provides supplemental requirements and guidance for the planning and performing of the integration processes given in ISO/IEC/IEEE 15288 and ISO/IEC/IEEE 12207;
— provides guidance on the relationship between the integration process and other life cycle processes.
— specifies requirements for information items to be produced as a result of using the integration…