Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled...
ISO 13975:2012 specifies a method of evaluating the ultimate anaerobic biodegradability of plastic materials in a controlled anaerobic slurry digestion system with a solids concentration not exceeding 15 %, which is often found for the treatment of sewage sludge, livestock faeces or garbage. The test method is designed to yield a percentage and rate of conversion of the organic carbon in the test…
The purpose of this document is to establish the conformity requirements for recycled-content
products and the certification requirements to verify their conformity in relation to the established requirements.
The requirements concern the quantity of recycled materials found in a recycled-content product
and the product marking to facilitate its identification.
This certification program…
Residual current operated circuit-breakers with integral overcurrent protection for household and si...
IEC 61009-1:2010+A1:2012 applies to residual current operated circuit breakers with integral overcurrent protection functionally independent of, or functionally dependent on, line voltage for household and similar uses (hereafter referred to as RCBOs), for rated voltages not exceeding 440 V a.c. with rated frequencies of 50 Hz, 60 Hz or 50/60 Hz and rated currents not exceeding 125 A and rated…
Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and con...
IEC 60309-4:2006+A1:2012 applies to self-contained products that combine within a single enclosure, a socket-outlet or connector according to IEC 60309-1 or IEC 60309-2 and a switching device, with a rated operating voltage not exceeding 1 000 V d.c. or a.c. and 500 Hz, and a rated current not exceeding 800 A, primarily intended for industrial use, either indoors or outdoors. These accessories…
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules
IEC 60838-2-2:2006+A1:2012 applies to connectors for building-in (including those used for interconnection between LED modules) of miscellaneous types to be used with PCB-based LED modules. It bears the edition number 1.1. The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. A vertical line in the margin shows where the…
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and f...
IEC 60947-3:2008+A1:2012 applies to switches, disconnectors, switch-disconnectors and fuse-combination units to be used in distribution circuits and motor circuits of which the rated voltage does not exceed 1 000 V a.c. or 1 500 V d.c. The manufacturer shall specify the type, ratings and characteristics according to the relevant standard of any incorporated fuses. The technical content is…
High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchge...
IEC 62271-207:2012 applies to gas-insulated switchgear assemblies for alternating current of rated voltages above 52 kV for indoor and outdoor installations, including their supporting structure. This second edition of IEC 62271-207 cancels and replaces the first edition published in 2007. It constitutes a technical revision. This edition includes the following significant technical changes with…
Intelligent transport systems — Freight land conveyance content identification and communication (FL...
ISO/TS 26683-2:2012 provides application interface profiles for land cargo transport data agglomeration and transfer (within the context and architecture described in ISO/TS 26683-1), using one or more of the reference list of International Standards defined in Annex A of ISO 26683-1:2012.
ISO/TS 26683-2:2012 defines a number of application interface profiles for land cargo transport data to…
