Components for low-voltage surge protective devices - Part 312: Selection and application principles...
IEC 61643-312:2013 is applicable to gas discharge tubes (GDT) used for overvoltage protection in telecommunications, signalling and low-voltage power distribution networks with nominal system voltages up to 1 000 V (r.m.s.) a.c. and 1 500 V d.c. They are defined as a gap, or several gaps with two or three metal electrodes hermetically sealed so that gas mixture and pressure are under control.…
Earth-moving machinery — Operator training — Content and methods
ISO 7130:2013 provides a basis for content and methods used for operator training for earth-moving machinery as defined in ISO 6165. This training in turn provides the basis for developing operators of earth-moving machinery who are knowledgeable and understand the manufacturer's instructions for safe and proper operation and routine maintenance. It establishes criteria for evaluating the…
Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - ...
IEC 61472:2013 describes a method for calculating the minimum approach distances for live working, at maximum voltages between 72,5 kV and 800 kV. This standard addresses system overvoltages and the working air distances or tool insulation between parts and/or workers at different electric potentials. The required withstand voltage and minimum approach distances calculated by the method described…
Information technology — Future Network — Problem statement and requirements — Part 6: Media transpo...
ISO/IEC TR 29181-6:2013 describes the problem statement and requirements for the Future Network in the perspective of media transport. ISO/IEC TR 29181-6:2013 specifies:
detailed description of the media transport requirements in the Future Network;
identification and definition of services, basic and media services, which will fit the requirements for communications over heterogeneous…
Information technology - Future Network - Problem statement and requirements - Part 6: Media transpo...
ISO/IEC TR 29181-6:2013 describes the problem statement and requirements for the Future Network in the perspective of media transport. ISO/IEC TR 29181-6:2013 specifies:
detailed description of the media transport requirements in the Future Network;
identification and definition of services, basic and media services, which will fit the requirements for communications over heterogeneous…
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and commo...
IEC 60695-2-10:2013 specifies the glow-wire apparatus and common test procedure to simulate the effects of thermal stresses which may be produced by heat sources such as glowing elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. The test procedure described in this standard is a common test procedure intended for the small-scale…
Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for in...
ISO/IEC 7816-4:2013 is intended to be used in any sector of activity. It specifies:
a) contents of command-response pairs exchanged at the interface,
b) means of retrieval of data elements and data objects in the card,
c) structures and contents of historical bytes to describe operating characteristics of the card,
d) structures for applications and data in the card, as seen at the interface when…
Identification cards - Integrated circuit cards - Part 4: Organization, security and commands for in...
ISO/IEC 7816-4:2013 is intended to be used in any sector of activity. It specifies:
a) contents of command-response pairs exchanged at the interface,
b) means of retrieval of data elements and data objects in the card,
c) structures and contents of historical bytes to describe operating characteristics of the card,
d) structures for applications and data in the card, as seen at the interface when…
Wind turbines - Part 12-2: Power performance of electricity-producing wind turbines based on nacelle...
IEC 61400-12-2:2013 specifies a procedure for verifying the power performance characteristics of a single electricity-producing, horizontal axis wind turbine, which is not considered to be a small wind turbine per IEC 61400-2. This standard is intended to be used when the specific operational or contractual specifications may not comply with the requirements set forth in IEC 61400-12-1:2005. The…
Health informatics — Syntax to represent the content of healthcare classification systems — Classifi...
The main purpose of ISO 13120:2013 is to formally represent the content and hierarchical structure of healthcare classification systems in a markup language for the safe exchange and distribution of data and structure between organizations and dissimilar software products.
The scope of healthcare classifications systems covered in ISO 13120:2013 encompasses terminologies, and is constrained to…
