Rechercher

ISO/TS 15638-19:2013 addresses the provision of ?Vehicle Parking Facility' and specifies the form and content of such data required to support such systems, and access methods (4.2) to that data. ISO/TS 15638-19:2013 provides specifications (4.44) for common communications and data exchange aspects of the application service (4.4) ?Vehicle Parking Facility' that a regulator (4.65) may…

IEC 61169-1:2013, which is a generic specification, relates to radio frequency connectors for r.f. transmission lines for use in telecommunications, electronics and similar equipment. It provides the basis for the sectional standards, which apply to individual connector types. It is intended to establish uniform concepts and procedures concerning:<br /> - terminology;<br /> - standard…

IEC 61558-2-26:2013 deals with the safety of transformers, power supply units and switch mode power supply units all for saving energy and other purposes in electrical installations by adjusting the output voltage and/or other electrical characteristics on the output circuits without interruption affected by the transformers, power supply unit and switch mode power supply unit. The attention of…

IEC 61169-1:2013, which is a generic specification, relates to radio frequency connectors for r.f. transmission lines for use in telecommunications, electronics and similar equipment. It provides the basis for the sectional standards, which apply to individual connector types. It is intended to establish uniform concepts and procedures concerning: - terminology; - standard ratings and…

IEC/TS 62224:2013(E) explains the conceptual model of the protocol specification to exchange license information between DRM modules. This Technical Specification also outlines which models should be defined as standard models as well as the standard meanings (mainly from the viewpoint of information security in the environment, including home server systems). This second edition cancels and…

IEC 60601-2-62:2013 applies to the basic safety and essential performance of HIGH INTENSITY THERAPEUTIC ULTRASOUND EQUIPMENT. This International Standard adds or replaces clauses listed in the IEC 60601-1 that are specific for HIGH INTENSITY THERAPEUTIC ULTRASOUND EQUIPMENT. If a clause or subclause is specifically intended to be applicable to such equipment only, or to related systems only, the…

IEC 62606:2013 applies to arc fault detection devices (AFDD) for household and similar uses in a.c. circuits. An AFDD is designed by the manufacturer: - either as a single device having opening means able to open the protected circuit in specified conditions; or - as a single device integrating a protective device; or - as a separate unit, according to Annex D assembled on site with a declared…

IEC 60747-3:2013 gives the requirements for the following devices: - signal diodes (excluding diodes designed to operate at frequencies above several hundred MHz); - switching diodes (excluding high power rectifier diodes); - voltage-regulator diodes; voltage-reference diodes; - current-regulator diodes. This edition includes the following significant technical changes with respect to the…

ISO/TS 18083|IDF/RM 51:2013 specifies the calculation of the approximate content of phosphorus from added phosphate salts and phosphorus containing pH-regulating agents in processed cheese products. The method is applicable to processed cheese products derived mainly from cheese varieties with a P/N ratio of 0,12 ± 0,02 and containing no ingredients in quantities substantially affecting the P/N…