General requirements for arc fault detection devices
IEC 62606:2013 applies to arc fault detection devices (AFDD) for household and similar uses in a.c. circuits. An AFDD is designed by the manufacturer:
- either as a single device having opening means able to open the protected circuit in specified conditions; or
- as a single device integrating a protective device; or
- as a separate unit, according to Annex D assembled on site with a declared…
Semiconductor devices - Part 3: Discrete devices: Signal, switching and regulator diodes
IEC 60747-3:2013 gives the requirements for the following devices:
- signal diodes (excluding diodes designed to operate at frequencies above several hundred MHz);
- switching diodes (excluding high power rectifier diodes);
- voltage-regulator diodes; voltage-reference diodes;
- current-regulator diodes.
This edition includes the following significant technical changes with respect to the…
Processed cheese products — Calculation of content of added phosphate expressed as phosphorus
ISO/TS 18083|IDF/RM 51:2013 specifies the calculation of the approximate content of phosphorus from added phosphate salts and phosphorus containing pH-regulating agents in processed cheese products. The method is applicable to processed cheese products derived mainly from cheese varieties with a P/N ratio of 0,12 ± 0,02 and containing no ingredients in quantities substantially affecting the P/N…
IEC 62716:2013 describes test sequences useful to determine the resistance of PV modules to ammonia (NH3). All tests included in the sequences, except the bypass diode functionality test, are fully described in IEC 61215, IEC 61646 and IEC 61730-2. They are combined in this standard to provide means to evaluate possible faults caused in PV modules when operating under wet atmospheres having high…
Enterprise-control system integration - Part 2: Object and attributes for enterprise-control system ...
IEC 62264-2:2013 specifies generic interface content exchanged between manufacturing control functions and other enterprise functions. The interface considered is between Level 3 manufacturing systems and Level 4 business systems in the hierarchical model defined in IEC 62264-1. The goal is to reduce the risk, cost, and errors associated with implementing the interface. This second edition…
Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance req...
IEC 62388:2013 specifies the minimum operational and performance requirements, methods of testing and required test results conforming to performance standards not inferior to those adopted by the IMO in Resolution MSC.192(79).<br />
(MSC.192/2) The radar installation, in addition to meeting the general requirements as set out in resolution A.694(17) and the related standard IEC 60945,…
Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance req...
IEC 62388:2013 specifies the minimum operational and performance requirements, methods of testing and required test results conforming to performance standards not inferior to those adopted by the IMO in Resolution MSC.192(79).
(MSC.192/2) The radar installation, in addition to meeting the general requirements as set out in resolution A.694(17) and the related standard IEC 60945, should comply…
Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance ...
IEC 62612:2013 specifies the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic and similar general lighting purposes, having:
- a rated power up to 60 W;
- a rated voltage of > 50 V a.c. up to 250 V a.c.;
- a lamp cap as listed in IEC 62560. This first edition of…
