Rechercher

IEC 62798:2014 specifies test procedures, conditions and methods according to which the main parameters and the main operational characteristics of industrial infrared emitters are established. A limitation of the scope of this standard is that the infrared emitters have a maximum spectral emission at longer wavelengths than 780 nm in air or vacuum, and are emitting wideband continuous spectra…

IEC 61439-5:2014 defines the specific requirements for public electricity network distribution assemblies (PENDAs). PENDAs have the following criteria: - used for the distribution of electrical energy in three phase systems for which the rated voltage does not exceed 1 000 V a.c. (see Figure 101 for a typical distribution network); - open ASSEMBLIES are not covered by this standard; - suitable…

ISO 17296-3:2014 covers the principal requirements applied to testing of parts manufactured by additive manufacturing processes. It specifies main quality characteristics of parts, specifies appropriate test procedures, and recommends the scope and content of test and supply agreements. ISO 17296-3:2014 is aimed at machine manufacturers, feedstock suppliers, machine users, part providers, and…

IEC 62026-3:2014 specifies an interface system between single or multiple controllers, and control circuit devices or switching elements. The interface system uses two conductor pairs within one cable - one of these pairs provides a differential communication medium and the other pair provides power to the devices. This part establishes requirements for the interoperability of components with…

IEC 62645:2014 establishes requirements and provides guidance for the development and management of effective security programmes for I&C computer-based systems for NPPs, possibly integrating HPD (HDL (Hardware Description Language) Programmed Devices), hereinafter named I&C CB&HPD systems. Inherent to these requirements and guidance is the criterion that the power plant I&C CB…

IEC 60335-2-25:2010+A1:2014 deals with the safety of microwave ovens for household and similar use, their rated voltage being not more than 250 V. This standard also deals with combination microwave ovens, for which Annex AA is applicable. This standard also deals with microwave ovens intended to be used on board ships, for which Annex BB is applicable. Appliances not intended for normal…

IEC 61747-1-1:2014 is a generic specification for liquid crystal display devices. It defines general procedures for testing and gives general rules for the measuring methods of the electrical and optical characteristics, the rules for climatic and mechanical tests, and the rules for endurance tests. This first edition cancels and replaces the first edition of IEC 61747-1 published in 1998 and…

IEC 60092-350:2014 provides the general constructional requirements and test methods for use in the manufacture of electric power, control and instrumentation cables with copper conductors intended for fixed electrical systems at voltages up to and including 18/30(36) kV on board ships and offshore (mobile and fixed) units. The following types of cables are not included: - optical fibre; - sub-…

ISO/TS 17383:2014 describes the procedure for the capillary gas chromatographic determination of the qualitative and semi-quantitative composition of individual triglycerides of fats, oils, and fat mixtures. The separation of the triglycerides is based on their retention depending on the carbon number of the fatty acids in the triglycerides and their degree of unsaturation. ISO/TS 17383:2014 is…

ISO 249:2014 specifies a method for the determination of the dirt content of raw natural rubber. It is not applicable to dirt present as surface contamination.