Fluid power — Specification of reference dictionary — Part 1: General overview on organization and s...
ISO 18582-1:2016 provides the basis for the preparation of a reference dictionary of standardized product properties for the area of fluid power, and for the provision of this reference dictionary and its entire contents in electronic form.
ISO 18582-1:2016, based on ISO 13584‑42 and ISO/IEC Guide 77‑2, specifies a reference dictionary of standardized product properties for the area of fluid…
Test methods for electrical materials, printed boards and other interconnection structures and assem...
IEC 61189-5-1:2016 is a catalogue of test methods representing methodologies and procedures that can be applied to test printed board assemblies. This part of IEC 61189 contains the types of content of the IEC 61189-5 series, as well as guidance documents and handbooks for printed board assemblies.
Air cargo — Non-certified lower deck containers — Design and testing
ISO 4118:2016 covers the design, performance and testing requirements for lower deck containers for use in main line aircraft which do not require airworthiness approval/certification when loaded under the conditions of compartment restraint and/or where applicable according to the aircraft type's approved Weight and Balance Manual, ISO 8097 or ISO 21100 equivalent base plate restraint for…
Recommendations for renewable energy and hybrid systems for rural electrification - Part 9-5: Integr...
IEC TS 62257-9-5:2016 is available as IEC 62257-9-5:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC TS 62257-9-5:2016(E) applies to stand-alone rechargeable electric lighting appliances or kits that can be installed by a typical user without employing a technician. It presents a…
Iron ores — Determination of metallic iron content — Iron(III) chloride titrimetric method
ISO 16878:2016 specifies a titrimetric method for the determination of the metallic iron content of reduced iron ores.
This method is applicable to a concentration range of 57,5 % mass fraction to 90,5 % mass fraction of the metallic iron.
NOTE The term "metallic iron" means those forms of iron not bonded to oxygen or not present as pyrite.
Measurement procedures for materials used in photovoltaic modules - Part 1-5: Encapsulants - Measure...
IEC 62788-1-5:2016 provides a method for measuring the maximum representative change in linear dimensions of encapsulation sheet material in an unrestricted thermal exposure as might or might not be seen during photovoltaic (PV) module fabrication. Data obtained using this method may be used by encapsulation material manufacturers for the purpose of quality control of their encapsulation material…
Solid biofuels — Determination of total content of sulfur and chlorine
ISO 16994:2016 describes methods for the determination of the total sulfur and total chlorine content in solid biofuels. It specifies two methods for decomposition of the fuel and different analytical techniques for the quantification of the elements in the decomposition solutions. The use of automatic equipment is also included in ISO 16994:2016, provided that a validation is carried out as…
Rubber, raw natural — Determination of dirt content
ISO 249:2016 specifies a method for the determination of the dirt content of raw natural rubber.
It is not applicable to dirt present as surface contamination.
Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitche...
IEC 60335-2-14:2016 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.
IEC 60335-2-14:2016 deals with the safety of electric kitchen machines for household and similar purposes, their…
