Rechercher

IEC 62747:2014+A1:2019 defines terms for the subject of self-commutated voltage-sourced converters used for transmission of power by high voltage direct current (HVDC). The standard is written mainly for the case of application of insulated gate bipolar transistors (IGBTs) in voltage sourced converters (VSC) but may also be used for guidance in the event that other types of semiconductor devices…

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 12713, Non-destructive testing — Acoustic emission inspection — Primary calibration of…

IEC 62717:2014+A1:2015+A2:2019 specifies the performance requirements for LED modules, together with the test methods and conditions, required to show compliance with this standard. This first edition cancels and replaces IEC PAS 62717 published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC PAS 62717…

IEC 60674-2:2016+A1:2019 is applicable to plastic films used for electrical purposes. This part of IEC 60674 gives methods of test. This second edition cancels and replaces the first edition published in 1988 and Amendment 1 (2001). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - this…

This document specifies test procedures for specimens obtained from round bamboo culms. The data obtained from the test methods can be used to establish characteristic physical or mechanical properties to be used in structural engineering design or for other scientific purposes. This document provides methods for evaluating the following physical and strength properties: moisture content, density…

IEC 60691:2015+A1:2019 is applicable to thermal-links intended for incorporation in electrical appliances, electronic equipment and component parts thereof, normally intended for use indoors, in order to protect them against excessive temperatures under abnormal conditions. This standard may be applicable to thermal-links for use under conditions other than indoors, provided that the climatic and…

IEC 60691:2015+A1:2019 is applicable to thermal-links intended for incorporation in electrical appliances, electronic equipment and component parts thereof, normally intended for use indoors, in order to protect them against excessive temperatures under abnormal conditions. This standard may be applicable to thermal-links for use under conditions other than indoors, provided that the climatic and…

This document specifies a method for the quantitative determination of trans and total (cis + trans) vitamin K1 in infant, pediatric and adult nutritionals using normal phase (NP) high-performance liquid chromatography (HPLC) with post-column reduction and fluorescence detection. The method demonstrated good linearity over a standard range of ~2 μg/l to 80 μg/l trans vitamin K1, and the limit of…

This document specifies a method for the determination of free and released formaldehyde in leathers. This method, based on high performance liquid chromatography (HPLC), is selective and not sensitive to coloured extracts and is intended to be used for precise quantification of formaldehyde. The formaldehyde content is taken to be the quantity of free-formaldehyde and formaldehyde extracted…

This document specifies a method for the determination of free and released formaldehyde in leathers. This method, based on colorimetric analysis, is not intended to be used for a precise quantification of formaldehyde. The formaldehyde content is taken to be the quantity of free-formaldehyde and formaldehyde extracted through hydrolysis contained in a water extract from the leather under…