Rechercher

1 Scope 1.1 Introductioin This document describes the overall UPnP AV Architecture, which forms the foundation for the UPnP AV Device and Service templates. The AV Architecture defines the general interaction between UPnP control points and UPnP AV devices. It is independent of any particular device type, content format, and transfer protocol. It supports a variety of devices such as TVs,…

1 Scope This device specification is compliant with the Universal Plug and Play Device Architecture version 1.0 [14]. It defines a device type referred to herein as MediaRenderer. The MediaRenderer specification defines a general-purpose device template that can be used to instantiate any Consumer Electronics (CE) device that is capable of rendering AV content from the home network. It…

1 Scope This device specification is compliant with the UPnP Device Architecture version 1.0 [14]. It defines a device type referred to herein as MediaServer. The MediaServer specification defines a general-purpose device that can be used to instantiate any Consumer Electronics (CE) device that provides AV content (for example, media) to other UPnP devices on the home network. It is based on…

1 Scope This service definition is compliant with UPnP Device Architecture version 1.0 [14]. This service type enables control over the transport of audio and video streams. The service type defines a common model for A/V transport control suitable for a generic user interface. It can be used to control a wide variety of disc, tape and solid-state based media devices such as CD players, VCRs…

1.1 This document establishes a system of designation for ethylene-vinyl acetate thermoplastic material, which can be used as the basis for specifications. 1.2 The types of ethylene-vinyl acetate (EVAC) plastic are differentiated from each other by a classification system based on appropriate levels of the following designatory properties: a) vinyl acetate content; b) melt mass-flow…

This document specifies methods for the chemical analysis of fine aluminium nitride powders used as the raw material for fine ceramics. This document stipulates the determination methods of the aluminium, total nitrogen, boron, calcium, copper, iron, magnesium, manganese, molybdenum, nickel, potassium, silicon, sodium, titanium, tungsten, vanadium, zinc, zirconium, carbon, chlorine, fluorine, and…

This document specifies a method for the measurement of smoke from exhaust gas of reciprocating internal combustion (RIC) engines at a steady state condition. The method evaluates the soot content by measurement of the blackening of a filter and derivation of black carbon mass concentration (mg/m3) from FSN. Where necessary, individual requirements may be specified for particular engine…

IEC 62747:2014+A1:2019 defines terms for the subject of self-commutated voltage-sourced converters used for transmission of power by high voltage direct current (HVDC). The standard is written mainly for the case of application of insulated gate bipolar transistors (IGBTs) in voltage sourced converters (VSC) but may also be used for guidance in the event that other types of semiconductor devices…

IEC 60674-2:2016+A1:2019 is applicable to plastic films used for electrical purposes. This part of IEC 60674 gives methods of test. This second edition cancels and replaces the first edition published in 1988 and Amendment 1 (2001). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - this…

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 12713, Non-destructive testing — Acoustic emission inspection — Primary calibration of…