Rechercher

1 Scope 1.1 This Standard applies to locking-type, pin and sleeve type plugs, receptacles, power inlets, connectors, junction boxes, and live-end covers rated up to 1200 A (for single- and multi-pole) and above 750 V to 35 kV ac, 50/60 Hz or up to 1500 V dc and which shall have one or more pilot contacts for multi-pole configuration and above 750 V to 1000 V ac or dc for single pole…

1 Scope 1.1 The requirements of this Standard apply to Grades A and B acrylic-polymer-coated, siliconepolymer- coated, or vinyl-polymer-coated electrical sleeving that consists of closely woven fabric made from glass (see Table 1 for materials and ratings) and intended for use in equipment designed to be installed and used in accordance with the rules of CSA C22.1, Canadian Electrical Code,…

1 Scope 1.1 This Standard specifies the requirements for insulating tubing that is usually round in cross-section and that consists entirely of extruded compounds whose characteristic constituents are thermosetting, elastomeric, or thermoplastic polymers (see Table 1 for materials and ratings). These requirements also cover heat-shrinkable and crosslinked tubing. 1.2 Tubing is intended for…

IEC 60335-2-115:2021 deals with the safety of electric appliances for skin beauty care of persons and intended for household, commercial and similar purposes, their rated voltage being not more than 250 V. Dual supply appliances, either mains-supplied or battery-operated, are regarded as battery-operated appliances when operated in the battery mode. Examples of appliances that are within the…

1 Scope 1.1 This National Standard of Canada applies to the following organic products: a) Unprocessed plants and plant products, livestock and livestock products, to the extent that the principles of production and specific verification rules for them are described in the standard; b) Processed agricultural crop and livestock products intended for human consumption or use and derived from…

1 Scope This Standard applies to the above-noted products that are intended to be installed or used in accordance with CSA C22.1, Canadian Electrical Code, Part I. This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric portable appliances for household and similar purposes that have a cooking function such as baking, roasting and…

IEC 60335-2-24:2020 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 60335-2-24:2020 edition 8.0 and the previous edition IEC 60335-2-24:2010+AMD1:2012+AMD2:2017 CSV edition 7.2. Futhermore, comments from IEC TC 61 experts are provided to explain the reasons of the most relevant…

IEC 60335-2-24:2020 deals with the safety of the following appliances, their rated voltage being not more than 250 V for single-phase appliances, 480 V for other appliances and 24 V DC for appliances when battery operated: – refrigerating appliances for household and similar use; – ice-makers incorporating a motor-compressor and ice-makers intended to be incorporated in frozen food storage…

This document addresses good clinical practice for the design, conduct, recording and reporting of clinical investigations carried out in human subjects to assess the clinical performance or effectiveness and safety of medical devices. For post-market clinical investigations, the principles set forth in this document are intended to be followed as far as relevant, considering the nature of the…

This document gives guidelines for pre-service-inspections (PSI) and in-service inspections (ISI) with mechanized ultrasonic test (UT) devices on components of the reactor coolant circuit of light water reactors. This document is also applicable on other components of nuclear installations. Mechanized ultrasonic inspections are carried out in order to enable an evaluation in case of — fault…