Rechercher

1 Scope 1.1 This Standard applies to single-polarity connectors for use with all alloys of copper or aluminum, or copper-clad aluminum conductors, or all three, for providing contacts between current-carrying parts, in accordance with the Canadian Electrical Code, Part I, CSA C22.1, in Canada, the National Electrical Code, NFPA 70, in the United States of America, or the Standard for…

1 Scope 1.1 The requirements of this Standard apply to manually operated, general-use snap switches and modular switch assembly for connection to copper (Cu) or copper-clad conductors used in accordance with the National Electrical Code (NEC), NFPA 70, the Canadian Electrical Code (CE Code), Part I, or NOM-001-SEDE and intended to be permanently connected in accordance with the NOM-001-SEDE…

1 Scope 1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in nonhazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico's Electrical Installations, NOM-001- SEDE, as follows: a) Enclosures for indoor locations, Types 1, 2…

Scope This National Standard of Canada assesses the combustion resistance of mattresses when in contact with a lighted cigarette. This standard covers the resistance of mattresses to ignition only by a burning cigarette and does not relate to their resistance to any other source of ignition or fire conditions. The testing and evaluation of a product against this standard may require the use of…

This National Standard of Canada establishes a classification system and specifies physical property requirements. Test methods to determine the properties for each class of polyethylene sheet material are specified. This document covers a material intended to be used in building construction applications, that may be used above grade or in contact with the ground. The material can provide the…

1 Scope 1.1 These requirements cover flexible metallic hose supplied with fittings on each end that facilitate connection without twisting the hose. They have a corrugated metal core or a nonmetallic inner core which are covered with a stainless steel braid. They have a nominal inside diameter of not more than 4 in (101 mm) intended for use in piping systems carrying compressed gases, such as…

1 Domaine d’application 1.1 Ces exigences couvrent les tuyaux flexibles métalliques fournis avec deux raccords, un à chaque extrémité, qui facilitent le raccordement sans qu’il faille tordre le tuyau. Les tuyaux sont dotés d’un centre en métal ondulé ou d’un centre intérieur non métallique recouvert d’une tresse en acier inoxydable. Leur diamètre intérieur nominal ne dépasse pas 4 po (101 mm…

1 Scope 1.1 This National Standard of Canada applies to the following organic products: a) Unprocessed plants and plant products, livestock and livestock products, to the extent that the principles of production and specific verification rules for them are described in the standard; b) Processed agricultural crop and livestock products intended for human consumption or use and derived from…

1 Scope This part of lEC 60320 sets the general requirements for appliance couplers for two poles and two poles with earth contact and for the connection of electrical devices for household and similar onto the mains supply. This part of lEC 60320 is also valid for appliance inlets/appliance outlets integrated or incorporated in appliances. The rated voltage does not exceed 250 V (a.c.) and…

1 Scope 1.1 The requirements of this Standard apply to manually operated, general-use snap switches for connection to copper (Cu) or copper-clad conductors used in accordance with the National Electrical Code(NEC), ANSI/NFPA 70, or the Canadian Electrical Code (CE Code), Part I, and and intended to be permanently connected in accordance with the NEC and the CE Code, Part I. In Canada,…