Rechercher

L'IEC 61189-5-301:2021 spécifie les méthodes pour soumettre à essai les caractéristiques de la pâte à braser à fines particules de brasage (ci-après désignée pâte à braser). Le présent document s’applique à la pâte à braser à fines particules de brasage, telle que le type 6 et le type 7 spécifiés dans l’IEC 61190-1-2, ou à une pâte à braser à particules plus fines. Ce type de pâte à braser…

IEC 61970-457:2021 specifies a standard interface for exchanging dynamic model information needed to support the analysis of the steady state stability (small-signal stability) and/or transient stability of a power system or parts of it. The schema(s) for expressing the dynamic model information are derived directly from the CIM, more specifically from IEC 61970-302. The scope of this document…

IEC 61970-457:2021 specifies a standard interface for exchanging dynamic model information needed to support the analysis of the steady state stability (small-signal stability) and/or transient stability of a power system or parts of it. The schema(s) for expressing the dynamic model information are derived directly from the CIM, more specifically from IEC 61970-302. The scope of this document…

This document specifies uniform methods for the testing and performance evaluation of metallic tube connections, stud ends for ports and flange connections for use in hydraulic fluid power applications. This document does not apply to the testing of hydraulic quick-action couplings, which is covered by ISO 18869. Tests outlined in this document are independent of each other and document the…

This document specifies the general requirements for instruments to be used in association with non-active surgical implants. These requirements apply to instruments when they are manufactured and when they are supplied after refurbishment. NOTE In this document, unless otherwise specified, the term "instrument" refers to an instrument for use in association with non-active surgical…

Le présent document spécifie les exigences générales relatives aux instruments à utiliser en association avec les implants chirurgicaux non actifs. Ces exigences s'appliquent aux instruments fournis après fabrication ou aux instruments fournis après remise en état. NOTE Dans le présent document, sauf indication contraire, le terme «instrument» désigne un instrument destiné à être…

IEC 61800-2:2021 applies to adjustable speed electric AC power drive systems, which include semiconductor power conversion and the means for their control, protection, monitoring, measurement and the AC motors. It applies to adjustable speed electric power drive systems intended to feed AC motors from a BDM or CDM connected to line-to-line voltages up to and including 35 kV AC 50 Hz or 60 Hz and…

L’IEC 61800-2:2021 s’applique aux entraînements électriques de puissance à vitesse variable en courant alternatif, incluant les convertisseurs à semiconducteurs et les moyens permettant de les commander, de les protéger, de les surveiller, de les mesurer, ainsi que les moteurs à courant alternatif. Elle s’applique aux entraînements électriques de puissance à vitesse variable destinés à alimenter…

1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the existing text with the following: This part of IEC 61010 specifies safety requirements for electrical equipment intended for sterilization, washing, and disinfection of medical materials in the medical, veterinary, pharmaceutical and laboratory fields, when…

1 Scope 1.1 This Standard applies to luminaires for use in non-hazardous locations and that are intended for installation on branch circuits of 600 V nominal or less between conductors in accordance with the Canadian Electrical Code, Part I (CEC), CSA C22.1, with the U. S. National Electrical Code (NEC), ANSI/NFPA 70, and with the Mexican National Electrical Code, NOM-001-SEDE. 1.2 This…