Gas cylinders — Parallel threads for connection of valves to gas cylinders — Part 1: Specification
This document specifies definitions, dimensions and tolerances of parallel screw threads of M30 x 2, M25 x 2 and M18 x 1,5, for the connection of valves to medical and industrial gas cylinders.
This document does not contain the connection requirements for:
— mechanical strength;
— gas tightness;
— capability of repeated assembly and dismounting operations (this aspect is covered in ISO…
Domestic gas cooking appliances — Safety — Part 21: Particular requirements for gas hobs, gas grills...
This document specifies particular requirements for safety, construction and materials of household gas surface cooking appliances. For general requirements for safety, construction and materials of gas hobs, see ISO/TS 21364-1:2021.
This document covers the following:
— surface cooking appliances:
— hobs;
— surface grills;
— griddles;
being built-in, part of a cooking appliance or…
Domestic gas cooking appliances — Safety — Part 22: Particular requirements for ovens and compartmen...
This document specifies particular requirements for safety, construction and materials of domestic gas ovens and compartment grills. For general requirements for safety, construction and materials of gas ovens and compartment grills, ISO/TS 21364-1:2021 applies.
This document covers the following gas cooking appliances:
— ovens with natural or forced convection;
— pyrolytic-self-cleaning…
Domestic gas cooking appliances — Safety — Part 1: General requirements
This document specifies the safety requirements for domestic gas cooking appliances. These appliances are freestanding, built-in or table-top and are intended to be used indoors. This document applies to the gas sections of the appliances and their component parts (e.g. combined gas-electric cooking appliances). This document does not apply to:
a) electrical heated elements as part of the…
Road vehicles — Interchange of digital information on electrical connections between towing and towe...
This document specifies the application layer, the payload of messages, and parameter groups for equipment other than brakes and running gears, to ensure the interchange of digital information between road vehicles with a maximum authorized total mass greater than 3 500 kg and their towed vehicles, including communication between towed vehicles.
This document supports the parameters and message…
Uninterruptible power systems (UPS) - Part 1: Safety requirements
IEC 62040-1:2017+A1:2021 applies to movable, stationary, fixed or built-in UPS for use in low-voltage distribution systems and that are intended to be installed in an area accessible by an ordinary person or in a restricted access area as applicable, that deliver fixed frequency AC output voltage with port voltages not exceeding 1 000 V AC or 1 500 V DC and that include an energy storage device.…
Uninterruptible power systems (UPS) - Part 1: Safety requirements
IEC 62040-1:2017+AMD1:2021 applies to movable, stationary, fixed or built-in UPS for use in low-voltage distribution systems and that are intended to be installed in an area accessible by an ordinary person or in a restricted access area as applicable, that deliver fixed frequency AC output voltage with port voltages not exceeding 1 000 V AC or 1 500 V DC and that include an energy storage device…
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping syst...
This document specifies the requirements of fitness for purpose of unplasticized polyamide (PA-U) piping system, intended to be buried and used for the supply of gaseous fuels. It also specifies the definitions of electrofusion and butt fusion joints.
This document specifies the method of preparation of test piece joints and the tests to be carried out on these joints for assessing the fitness…
Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intr...
This document specifies dimensions and requirements for the design and functional performance of small-bore connectors intended to be used for connections in intravascular applications or hypodermic connections in hypodermic applications of medical devices and accessories.
EXAMPLES Hypodermic syringes and needles or intravascular (IV) cannulae with male and female Luer slip connectors and Luer…
Small-bore connectors for liquids and gases in healthcare applications — Part 7: Connectors for intr...
This document specifies dimensions and requirements for the design and functional performance of small-bore connectors intended to be used for connections in intravascular applications or hypodermic connections in hypodermic applications of medical devices and accessories.
EXAMPLES Hypodermic syringes and needles or intravascular (IV) cannulae with male and female Luer slip connectors and Luer…
