Rechercher

This document specifies the requirements for design, specification, type testing and production testing and inspection for dedicated LPG self-closing cylinder valves for use with and directly connected to transportable refillable LPG cylinders. It also includes requirements for associated equipment for vapour and liquid service. Bursting discs and/or fusible plugs are not covered in this document…

1 Scope This document sets the general and dimensional interchangeability requirements for plugs, socket-outlets, connectors and appliance inlets with arcuate contacts of standardized configurations (hereinafter referred to as accessories), with a rated operating voltage not exceeding 600 V AC at a frequency of 50 Hz and 60 Hz and with rated currents of 20 A and 30 A, primarily intended for…

1 Scope 1.1 The requirements of this Standard apply to Grades A and B acrylic-polymer-coated, siliconepolymer- coated, or vinyl-polymer-coated electrical sleeving that consists of closely woven fabric made from glass (see Table 1 for materials and ratings) and intended for use in equipment designed to be installed and used in accordance with the rules of CSA C22.1, Canadian Electrical Code,…

This document establishes a system for sealing the port connection of couplings used in the aerospace industry. It specifies dimensions to achieve interchangeability of the port connection, the fitting end and a seal. The seal can be a standard O‑ring or a special ring.

This document defines the geometry of the interface of removable 24° cone couplings for fluid systems in aircraft. The connection with the pipe of each one of the connecting elements can be of different design. This document specifies the dimensions which allow the interchangeability of the male and female elements and of the nut used for the connection. The dimensions define the maximum volume…

Field devices are a key component in intelligent transport systems (ITS). Field devices include traffic signals, message signs, weather stations, traffic sensors, roadside equipment for connected ITS (C-ITS) environments, etc. Field devices often need to exchange information with other external entities (managers). Field devices can be quite complex necessitating the standardization of many data…

This document specifies the requirements for a protocol derived from HCI/HCP (see ETSI TS 102 622) enabling communication for devices regardless of data link and physical layers. This document covers the following: a) outline of a system comprised of one or more hosts and one controller; b) extension of connection topology between hosts and host controller (i.e. star topology and additional…

This document specifies the requirements for a protocol derived from HCI/HCP (see ETSI TS 102 622) enabling communication for devices regardless of data link and physical layers. This document covers the following: a)   outline of a system comprised of one or more hosts and one controller; b)   extension of connection topology between hosts and host controller (i.e. star topology and additional…

This document specifies the conformance test plan (CTP) for the lean application layer for MOST, a synchronous time-division-multiplexing network, as specified in ISO 21806-14. This document specifies conformance test cases (CTCs) for root nodes and remote nodes in the following categories: —    network startup; —    network shutdown; —    network events; —    node discovery; —    connection…

This document specifies the technical requirements for the lean application layer for MOST, a synchronous time-division-multiplexing network. The lean application layer includes a specification of the services available to control the configuration and behaviour of the network management. The lean application layer covers the definition of: —    node kinds, —    node addressing, —    data…