1.1 Scope
1.1.1 This Standard covers press connections made with:
(a) copper or copper alloy fittings and Type K, L, and M copper tube;
(b) carbon steel fittings and Schedule 10 and 40 carbon steel pipe;
(c) stainless steel fittings and Schedule 5, 10, and 40 stainless steel pipe; or
(d) stainless steel fittings and stainless steel pipe complying with the dimensions specified in
Table 1.
1…
1.1 The requirements of this Standard cover the design and construction of Type B (round or oval) and
Type BW Gas Vents.
1.2 Type B Gas Vents are intended for the venting of flue gases having temperatures not exceeding
245 °C, from gas fired appliances certified with draft hoods or diverters. Type B Gas Vents are also
intended for use with gas fired appliances, without draft hoods or…
STANDARD FOR FACTORY-BUILT CHIMNEY CONNECTORS AND WALL PASS-THROUGH ASSEMBLIES
1.1 These requirements apply to factory-built chimney connectors and wall pass-through assemblies that
do not require field fabrication.
1.2 The factory-built chimney connectors and wall pass-through assemblies are for use with gas, liquid
and solid-fuel-fired residential appliances and building heating equipment where the flue-gas temperatures
do not normally exceed 650 °C.
1.3 Factory-…
Systèmes d'injection à aiguille pour usage médical — Exigences et méthodes d’essai — Partie 4: ...
Le présent document spécifie les exigences et les méthodes d'essai pour les systèmes d'injection à aiguille (NIS) contenant de l'électronique avec ou sans logiciel (NIS-E).
Le système d'injection à aiguille contenant de l'électronique peut être à usage unique ou réutilisable et peut fonctionner avec ou sans connexions électriques/conductrices à d'autres dispositifs.…
Needle-based injection systems for medical use — Requirements and test methods — Part 4: Needle-base...
This document specifies requirements and test methods for needle-based injection systems (NISs) containing electronics with or without software (NIS-Es).
The needle-based injection system containing electronics can be single use or reusable and can be operated with or without electrical/conductive connections to other devices. The system is intended to deliver medication to a patient by self-…
1 Scope
1.1 This Standard applies to grounding and bonding equipment for use in accordance with CSA C22.1,
Canadian Electrical Code, Part I in Canada, the National Electrical Code, NFPA 70, in the United States,
or the Standard for Electrical Installations, NOM-001-SEDE, in Mexico.
1.2 This Standard applies to the following grounding and bonding equipment:
a) ground clamps, bonding devices,…
High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclos...
IEC 62271-209:2019+AMD1:2022 covers the connection assembly of fluid-filled and extruded cables to gas-insulated metal enclosed switchgear (GIS), in single- or three-phase arrangements where the cable terminations are fluid-filled or dry-type and there is a separating insulating barrier between the cable insulation and the gas insulation of the switchgear. This second edition cancels and replaces…
Information technology — Internet of media things — Part 2: Discovery and communication API
This document specifies the abstract class of a media thing (MThing), which is a basic component to construct the Internet of media things. The MThing class contains the basic APIs to:
— discover other MThing(s) in the network;
— connect/disconnect MThing(s);
— support transactions (e.g. payments) using media tokens between MThings.
Information technology - Internet of media things - Part 2: Discovery and communication API
This document specifies the abstract class of a media thing (MThing), which is a basic component to construct the Internet of media things. The MThing class contains the basic APIs to:
— discover other MThing(s) in the network;
— connect/disconnect MThing(s);
— support transactions (e.g. payments) using media tokens between MThings.
