Rechercher

ISO 17510:2015 applies to masks and their accessories used to connect a sleep apnoea breathing therapy equipment to the patient. It specifies requirements for masks and accessories, including any connecting element, that are required to connect the patient-connection port of sleep apnoea breathing therapy equipment to a patient for the application of sleep apnoea breathing therapy (e.g. nasal…

This standard specifies classification, structure and symbol, design requirement, testing and inspection methods, marking of marine combined connecting mooring line (hereinafter referred to as combined line). This standard applies to design, manufacture and inspection of combined line for tanker, combined line used in others types of ships can selected by reference.

This document specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids. End connection joints, body joints, vacuum application, effects of corrosion, and radiation are excluded from this document. This document concerns classification system and…

ISO 17987-3:2016 specifies the LIN protocol including the signal management, frame transfer, schedule table handling, task behaviour and status management and LIN master and slave node. It contains also OSI layer 5 properties according to ISO 14229‑7 UDSonLIN-based node configuration and identification services (SID: B016 to B816) belonging to the core protocol specification. A node (normally a…

ISO 17987-4:2016 specifies the 12 V and 24 V electrical physical layers (EPL) of the LIN communications system. The electrical physical layer for LIN is designed for low-cost networks with bit rates up to 20 kbit/s to connect automotive electronic control units (ECUs). The medium that is used is a single wire for each receiver and transmitter with reference to ground. ISO 17987-4:2016 includes…

This document specifies the requirements for wire or textile reinforced hoses and hose assemblies suitable for dispensing hydrogen up to 70 MPa nominal working pressure, in the operating temperature range of −40 °C to 65 °C. This document contains safety requirements for material, design, manufacture and testing of gaseous hydrogen hose and hose assemblies for hydrogen fuelling stations. Hoses…

This document specifies requirements for ten classes, four grades and seven types of wire- or textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 102. Each class has a single maximum working pressure for all sizes. They are suitable for use with: —    oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743‑4 at temperatures ranging from −40 °C…

ISO 7718-1:2016 specifies minimum requirements for dimensions and unobstructed space around main deck passenger doors of future types of civil-passenger transport aircraft when they are intended to be compatible with the thousands of passenger boarding bridges and passenger transfer vehicles existing, or being planned, in airports worldwide. ISO 7718-1:2016 is not applicable to existing models of…

For factory made, residential, commercial and industrial, electrically operated compression, air-to-air air-conditioners and air-to-air heat pumps above 12kW, described as variable refrigerant flow systems, this document specifies: - performance testing, the standard conditions and the test methods for determining the capacity and efficiency ratings under heating and cooling, and - calculation…