Road vehicles — High-tension connections for ignition coils and distributors — Part 1: Socket-type
This part specifies the essential dimensions of socket-type connections, used for spark-ignition engines. Applies to high-tension sockets and cable connectors of type "A" (figures 1 and 2). An annex gives socket and connector type "B" (figures 3 and 4). This first edition cancels and replaces the ISO 3553:1975.
Photography — Front lens barrels up to 127 mm — Dimensions important to the connection of auxiliarie...
Specifies a standard series of diameter sizes for the front part of a lens barrel and a standard series of thread sizes for the same front barrel. The data are applicable to lenses of cameras, enlargers and similar equipment. They are meant to simplify the production and storage of such auxiliaries as screw-in filters.
Specified are details of the screw connectins to be used between a camera and a tripod or other accessory. The form of the connection is shown, and details are given of the nut and bolt screw threads.
Low-voltage fuses. Part 2: Supplementary requirements for fuses for use by authorized persons (fuses...
Section I: Fuses with fuse-links with blade contacts.
Section II: Fuses with fuse-links for bolted connections.
Section III: Fuses with fuse-links having cylindrical contact caps.
Specifies dimensional requirements necessary for the mounting of injection nozzle holders in diesel engines. The location of the fuel inlet and leak-off connections are not defined since they vary according to the particular application. Nozzle holders types 12 and 13 are used with the nozzles specified in ISO 2697. Some figures illustrate shapes and reference quantities of concern. This second…
1. Scope
1.1 This Standard applies to solid-state, single-phase motor speed controls, rated at 300 V and less, 20 A and less, designed to be used in circuits for the control of shaded pole, permanent split capacitor, or universal motors, and other motors suitable for use with this type of control, intended for use in nonhazardous locations in accordance with the Canadian Electrical Code,…
Standard for Compounds and Tapes for Threaded Pipe Joints
1. SCOPe
1.1 This Standard is for the determination of the acceptability of pipe joint
compounds and tapes for piping systems intended for the containment of alcohol,
gasohol, natural gas and methane, oxygen, petroleum distillates, propane and
butane, steam, and water (potable and non-potable).
1.2 Unless otherwise specified, products meeting this Standard are considered
suitable for the…
