Rechercher

1.1 These requirements cover the construction and security performance of equipment intended to automatically dispense currency when operated as intended by a customer, and to provide protection against unauthorized removal of currency. 1.2 If the product also receives deposits, the same degree of protection shall also be provided for the deposits. 1.3 Records shall be made in order…

This National Standard of Canada is equivalent to American National Standards Institute (ANSI) standard T1.403-1989. This standard describes the metallic interface between a carrier and customer installation (CI), referred to as the network interface (NI), at the DS1 rate. It establishes requirements at the NI necessary for compatible operation between the carrier and the CI. Interfaces…

La présente Norme internationale fixe les dimensions principales des parties en contact et les exigences de fonctionnement des coupleurs hydrauliques utilisés pour transmettre la puissance hydraulique des tracteurs agricoles aux machines agricoles. Elle est applicable aux coupleurs utilisés sur les canalisations hydrauliques, qui sont connectés et déconnectés fréquemment pour permettre le…

This National Standard of Canada is equivalent to International Standard ISO/IEC 10030:1990. This International Standard defines a protocol for the exchange of routeing information between an End System and a Subnetwork Address Resolution Entity. This International Standard is applicable to: a) End Systems which operate according to the main body of ISO 8878 to provide and…

1.1 Provides procedures for measuring harmonic currents generated by equipment to the extent that they affect the safety of electrical installations when the equipment is installed in accordance with the Canadian Electrical Code, Part I. 1.2 The procedures described in this Standard are provided for referencing in the Standards forming Part II of the Canadian Electrical Code. Although…

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI T1.408-1990. 1.1 General It establishes performance and technical criteria for interfacing and interconnecting the various functional groups shown in figure 1. Compliance with this standard is intended to ensure compatibility at the interface points /a and /b (figure 1) and should not…

1.1 This Standard covers structural quality steel plates, shapes, hollow sections, sheet piling, and bars for general construction and engineering purposes. 1.2 A number of strength levels are available under this Standard and are designated by the minimum yield strength in megapascals. The grades, types, and strength levels normally available are shown in Table 1. Charpy V-Notch…

1. Scope 1.1 These requirements apply to drive machine controllers, logic controllers, and operating devices accessory thereto, for starting, stopping, regulating, controlling, or protecting electric motors, generators, or other equipment, for elevators, escalators, moving walks, dumbwaiters, and elevating devices for the handicapped (wheelchair and stairway lifts). 1.2 The electrical…

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI T1.612-1990. 1 Scope This standard covers the connection between the Integrated Services Digital Network (ISDN) and terminals with interfaces for modems conforming to current standards (e.g. ANSI/EIA 232-D-1986), operating in accordance with demand or semi-permanent circuit mode ISDN…