Rechercher

Defines a single-exchange negotiation procedure for establishing operational characteristics when either one or more HDLC stations are capable of providing multiple selections. Provides a means for interchanging the necessary information to establish, at a minimum, a data link connection between two correspondents wishing to communicate. Describes the general purpose XID frame information field…

The objectives are to provide a standard cable bus for the interconnection of multiple devices, both backplane bus systems, such as the IEC 821 VMEbus, and stand-alone apparatus; to specify the electrical characteristics of the cable bus; to specify the protocols that precisely define the interaction between devices connected to the VICbus; to specify the mechanisms necessary to construct fault-…

Fieldbus is a digital serial, multidrop, data bus for communication with low-level industrial control and instrumentation devices such as transducers, actuators and local controllers. The Physical Layer provides for transparent transmission of Data Link Layer entities across physical connections. Specifies the requirements for Fieldbus component parts. Also specifies the media and network…

Specifies the dimensions, classification, designation, materials, requirements for electrical and mechanical characteristics, marking, delivery conditions. Annex A gives additional information when colour coding of the cables is intended.

Provides rules for connection diagrams, tables and lists. Replaces IEC 113-5 and -6.

Presents, in English and French, 66 terms in the following fields: general terms, layers, services and protocols, connection, application service elements, miscellaneous. In order to facilitate their translation into other languages, the definitions are drafted so as to avoid, as far as possible, any peculiarity attached to the language.

Presents, in English and French, 66 terms in the following fields: general terms, layers, services and protocols, connection, application service elements, miscellaneous. In order to facilitate their translation into other languages, the definitions are drafted so as to avoid, as far as possible, any peculiarity attached to the language.

1. Scope 1.1 This standard applies to self-contained household refrigerators and freezers designed to be installed and used in residential occupancies in accordance with the Canadian Electrical Code, Part 1, CSA Standard C22.1, and the National Electrical Code, ANSI/NFPA 70. 1.2 These requirements apply to household refrigerators and freezers intended for connection to 15 or 20 A, 100…

Specifies a system for classifying power take-off (PTO) drive shafts; the requirements for PTO yoke bosses; the PTO drive shaft sizes; the positioning of the power input connection for PTO-driven implements; the clearance zones. Applies to PTO drive shafts required for the connection of agricultural machines and implements to tractors.

1.1 This Standard applies to hydromassage bathtub appliances and associated accessories for residential and commercial use, intented to be permanently connected to a plumbing system and an electrical supply circuit of 250 V and less (ie, 150 V maximum to ground), for use indoors in nonhazardous locations, and for installation in accordance with the Rules of the Canadian Electrical Code,…