Rechercher

Is applicable to end systems or relay systems operating over token ring LAN subnetworks in the open systems interconnection (OSI) environment. Relates to any of the transport (Tx, Ux) or relay (Rx) profiles defined in ISO/IEC TR 10000-2, where such profile uses subnetwork type 53. Specifically, provides a common set of requirements that are applicable to transport groups TA, TB, TC, TD, TE, UA,…

1.1 This standard applies to asbestos-cement, nonpressure, small-diameter pipe, suitable for use as building sewer pipe and as building drain pipe buried under the floor. 1.2 For cautionary notes on cutting, sanding, grinding or drilling of this product, see par. 6.2.2 and 8.3.

This National Standard of Canada is based on International Standard IEC 1010-2-031:1993. 1. Scope and Object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This Particular Standard specifies requirements for the safety of hand-held and hand-manipulated probe assemblies designed to be used with equipment installed and used in accordance with the Rules…

Gives complete general and dimensional specifications. For flange connections, a minimum design factor of 2,5 is valid with screws of property class 8.8, not including weld joints, for which special instructions exist. The design factor of the flange may be increased to 3,5 or better by using flange-head screws of property class 10.9. Also includes appropriate references to the O-ring seals and…

Gives complete general and dimensional specifications. For flange connections, a design factor of 2,5 is valid, not including weld joints, for which special instructions exist. Also specifies the dimensions of the seals to be used, as well as the grooves to house the seals.

Specifies dimensions necessary for the mounting and interchangeability of flange-mounted fuel injectors, containing the nozzles specified in ISO 2697. The location of the fuel inlet and leak-off connections are not defined since they vary according to the particular application.

1.1 This Standard applies to mobile homes or modular units designed to be supported on longitudinal floor beams. Note: For simplicity, the term mobile home is used in the text of this Standard. 1.2 This Standard includes requirements for the following aspects of mobile home installation: (a) site preparation; (b) foundations; (c) anchorage; (d) connection of multiple-section units;…

This National Standard of Canada is based on International Standard ISO 5360:1993. 1 Scope This International Standard specifies the dimensions of agent-specific filling systems for agent-specific anaesthetic vaporizers. This International Standard does not specify construction materials. Materials used for the parts of filling systems which come into contact with liquid anaesthetic…

Deals with the safety of electrically operated commercial multi-purpose cooking pans not intended for household use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances.

Deals with the safety of electrically operated commercial griddles and griddle grills not intended for household use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances.