Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-0...
This National Standard of Canada is based on International Standard IEC 1010-2-031:1993.
1. Scope and Object This clause of part 1 is applicable except as follows:
1.1 Scope Replacement:
This Particular Standard specifies requirements for the safety of hand-held and hand-manipulated probe assemblies designed to be used with equipment installed and used in accordance with the Rules…
Hydraulic fluid power — Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MP...
Gives complete general and dimensional specifications. For flange connections, a minimum design factor of 2,5 is valid with screws of property class 8.8, not including weld joints, for which special instructions exist. The design factor of the flange may be increased to 3,5 or better by using flange-head screws of property class 10.9. Also includes appropriate references to the O-ring seals and…
Hydraulic fluid power — Four-screw, one-piece square-flange connections for use at pressures of 25 M...
Gives complete general and dimensional specifications. For flange connections, a design factor of 2,5 is valid, not including weld joints, for which special instructions exist. Also specifies the dimensions of the seals to be used, as well as the grooves to house the seals.
Specifies dimensions necessary for the mounting and interchangeability of flange-mounted fuel injectors, containing the nozzles specified in ISO 2697. The location of the fuel inlet and leak-off connections are not defined since they vary according to the particular application.
Site Preparation, Foundation, and Anchorage of Mobile Homes
1.1
This Standard applies to mobile homes or modular units designed to be supported
on longitudinal floor beams.
Note: For simplicity, the term mobile home is used in the text of this
Standard.
1.2
This Standard includes requirements for the following aspects of mobile home
installation:
(a) site preparation;
(b) foundations;
(c) anchorage;
(d) connection of multiple-section units;…
Anaesthetic vaporizers - Agent-specific filling systems
This National Standard of Canada is based on International Standard ISO 5360:1993.
1 Scope
This International Standard specifies the dimensions of agent-specific filling
systems for agent-specific anaesthetic vaporizers.
This International Standard does not specify construction materials. Materials
used for the parts of filling systems which come into contact with liquid
anaesthetic…
Safety of household and similar electrical appliances - Part 2: Particular requirements for commerci...
Deals with the safety of electrically operated commercial multi-purpose cooking pans not intended for household use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances.
Safety of household and similar electrical appliances - Part 2: Particular requirements for commerci...
Deals with the safety of electrically operated commercial griddles and griddle grills not intended for household use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances.
Safety of household and similar electrical appliances - Part 2: Particular requirements for commerci...
Deals with the safety of electrically operated commercial deep fat fryers not intended for household use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances.
Explains the meanings, in English and French, of a selection of terms commonly used in connection with the sampling and measurement of gases, vapours and particles for the determination. The terms are arranged in alphabetical order in English. An alphabetical index of the French terms is also given.
