Cardiac defibrillators — Connector assembly for implantable defibrillators — Dimensional and test re...
Specifies a unipolar connector assembly, DF-1, intended for use in connecting implantable defibrillator leads to implantable defibrillator generators which do not produce more than 1 kV/50 A peak output. Essential dimensions and performance requirements are specified along with test methods.
Hydraulic fluid power — Determination of characteristics of motors — Part 3: At constant flow and at...
Describes a method of determining the low-speed characteristics of positive-displacement rotary fluid power motors under constand flow and constant torque conditions. The method involves testing at slow speeds, which may generate frequencies having a significant influence upon the steady continuous torque output of the motor and affect the system to which the motor would be connected. The…
Earth-moving machinery — Auxiliary starting aid electrical connector
Specifies the details, dimensions and design of both plug (male) and receptacle (female) which must mate properly to permit interchangeable use of different makes of electrical connectors providing an auxiliary starting circuit for earth-moving machinery as defined in ISO 6165. Lays down a universal connecting device, with correct polarity, standard circuit coding and protection from electrical…
Information technology — Telecommunications and information exchange between systems — High-level da...
Defines a single-exchange negotiation procedure for establishing operational characteristics when either one or more HDLC stations are capable of providing multiple selections. Provides a means for interchanging the necessary information to establish, at a minimum, a data link connection between two correspondents wishing to communicate. Describes the general purpose XID frame information field…
Earth-moving machinery — Drain, fill and level plugs
Establishes the types, shapes and sizes of the parts of the plugs used in connection with the hand tools listed in ISO 4510-1 to permit easy removal and installation of plugs at the work-site. Does not set requirements, i.e. dimensions and materials, for the manufacture of plugs. Applies to the drain, fill and level plugs required on earth-moving machines for the changing of lubricants, coolants…
Information technology - Telecommunications and information exchange between systems - High-level da...
Defines a single-exchange negotiation procedure for establishing operational characteristics when either one or more HDLC stations are capable of providing multiple selections. Provides a means for interchanging the necessary information to establish, at a minimum, a data link connection between two correspondents wishing to communicate. Describes the general purpose XID frame information field…
Information technology — Microprocessor systems — VICbus — Inter-crate cable bus
The objectives are to provide a standard cable bus for the interconnection of multiple devices, both backplane bus systems, such as the IEC 821 VMEbus, and stand-alone apparatus; to specify the electrical characteristics of the cable bus; to specify the protocols that precisely define the interaction between devices connected to the VICbus; to specify the mechanisms necessary to construct fault-…
Fieldbus standard for use in industrial control systems - Part 2: Physical layer specification and s...
Fieldbus is a digital serial, multidrop, data bus for communication with low-level industrial control and instrumentation devices such as transducers, actuators and local controllers. The Physical Layer provides for transparent transmission of Data Link Layer entities across physical connections. Specifies the requirements for Fieldbus component parts. Also specifies the media and network…
Water-cooled secondary connection cables for resistance welding — Part 2: Dimensions and requirement...
Specifies the dimensions, classification, designation, materials, requirements for electrical and mechanical characteristics, marking, delivery conditions. Annex A gives additional information when colour coding of the cables is intended.
