Is applicable to non-accessible ID connections which are made with: appropriately designed ID terminations; -wires having solid round conductors of 0,25 mm to 3,6 mm nominal diameter; -wires having stranded conductors of 0,05 mm2 to 10 mm2 cross section.
Electrical installations of buildings - Part 7: Requirements for special installations or locations ...
Applies to the electrical installation in marinas which provide
connections to pleasure craft and to the electrical installation in
pleasure craft supplied only from the on-shore power-supply system.
Note: Such installations are characterized by the risk of
corrosion, movement of structures, mechanical damage and the risk
of electric shock being increased by reduction in body resistance
and…
1.1
This Standard applies to apparatus that is used to transmit, receive, and
process electronic signals and signals of vocal, musical, or visual origin, and
which is not necessarily under the jurisdiction of a skilled person.
Processing of electronic signals includes amplification, modulation,
demodulation, encoding, decoding, recording, reproduction, etc. This Standard
applies to…
1.1
Cette norme explique en détail la construction, le marquage et les essais des
instruments électriques portatifs utilisés pour détecter la présence de gaz
toxiques ou la concentration d'oxygène dans l'air. On peut utiliser ces
instruments dans les emplacements dangereux de classe I et dans les mines
grisouteuses conformément au Code canadien de l'électricité, Deuxième et…
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared fittings
Specifies general and dimensional requirements for the design and performance of 37° flared fittings which are suitable for use with ferrous and non-ferrous tubes with outside diameters from 6 mm to 50 mm, inclusive. These fittings are for use in fluid power and general applications within the limits of pressure and temperature specified for the connection of tubes and hose fittings to ports in…
Agricultural tractors — Hydraulic pressure for implements
Specifies the characteristics of the hydraulic pressure from agricultural tractors to connect hydraulic devices on implements, to permit interchangeable use of various types of implements using remote cylinders and other hydraulic devices. Applies to agricultural tractors intended for interchangeable implements.
Safety of household and similar electrical appliances - Part 2: Particular requirements for electric...
1. Scope
This clause of part 1 is applicable except as follows:
1.1 Replacement:
This part of IEC 335 applies to the safety of electric heat pumps, including heat pumps for sanitary (potable) hot water, air-conditioners, and dehumidifiers incorporating sealed motor-compressors.
The appliances referenced above may consist of one or more factory made assemblies. If provided in more…
Safety of household and similar electrical appliances - Part 2: Particular
requirements for commerc...
This National Standard of Canada is based on International Standard CEI/IEC 335-2-36:1993.
1. Scope
This clause of part 1 is replaced by:
This standard deals with the safety of electrically operated commercial cooking
ranges, ovens, hobs, hob elements and similar appliances not intended for
household use, their rated voltage being not more than 250 V for single phase
appliances…
Safety requirements for mains operated electronic and related apparatus for
household and similar g...
1. Scope
1.1 This standard applies to the following apparatus that is to be
connected to the supply mains, either directly or indirectly, intended
for domestic and similar general indoor use and not subject to dripping
or splashing:
- radio receiving apparatus for sound or vision;
- amplifiers;
- independent load transducers and…
