Rechercher

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC 11575:1995. 1 Scope This International Standard specifies general principles for the mappings between the OSI Data Link service (ISO/IEC…

Specifies dimensions for ports with ISO 261 threads and elastomeric (type E) or metal-to-metal (type B) sealing for general use and in fluid power applications with the stud ends detailed in ISO 9974-2 and ISO 9974-3. It also specifies test methods and the designation of these ports.

Concerns with Private Integrated Service Networks (PISNs) comprising one or more than one PISN exchanges (PINX) interconnected by inter-PINX connections (IPCs). Specifies unter-PINX connections that are provided by intervening networks (IVNs), and the way in which these are handled by PINXs to provide a platform for inter-PINX communication. Identifies the standardization to inter-connect PINXs…

Specifies requirements for extra low voltage systems for filament lamps intended for ordinary use on supply voltages not exceeding 1 000 V. The luminaires, being connected in parallel, are supplied via freely suspended continuous supporting conductors or profiles. The current in the output circuit of the system is limited to 25 A.

Concerns with Private Integrated Service Networks (PISNs) comprising one or more than one PISN exchanges (PINX) interconnected by inter-PINX connections (IPCs). Specifies unter-PINX connections that are provided by intervening networks (IVNs), and the way in which these are handled by PINXs to provide a platform for inter-PINX communication. Identifies the standardization to inter-connect PINXs…

Specifies dimensions, performance requirements and test procedures for heavy-duty (S series) and light-duty (L series) stud ends with ISO 261 threads and the elastomeric sealing that is used with them. It also specifies the designation of these stud ends and their elastomeric sealing.

Specifies dimensions, performance requirements and test procedures for heavy-duty (S series), light-duty (L series) and extra-light-duty (LL series) stud ends with ISO 261 threads and metal-to-metal sealing. It also specifies the designation of these stud ends.

Relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 9 kHz up to 80 MHz. Equipment not having at least one conducting cable (such as mains supply, signal line or earth connection), which can couple the equipment to the disturbing RF fields is excluded.…

Applies to the emission (radiated and conducted) of radio frequency disturbances of : - all lighting equipment with a primary function of generating and/or distributing light intended for illumination purposes and intended either for connection to the low voltage electricity supply or for battery operation; - the lighting part of multi-function equipment where one of the primary functions of this…

Specifies hardware and protocol specifications for local systems. Deals with direct local systems, in which the hand held unit is connected to one tariff device only at a time. Connection can be permanent or disconnectable through an electrical or optical coupling. The protocol took as its basis the basic reference model for communication between open systems (OSI).