Rechercher

This part of ISO 8759 specifies dimensions and requirements of the stationary equipment connection for agricultural wheeled tractors which are equipped with front-mounted power take-off but do not have front three-point linkage. It is applicable to the tractor categories defined in ISO 730-1. NOTE — ISO 8759-1 specifies requirements for the power take-off and the front three-point linkage.

This standard applies to circuit-breakers, the main contacts of which are intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.; it also contains additional requirements for integrally fused circuit-breakers.

This standard is divided into five sections, each dealing with a specific example of standardized fuse for use by authorized persons: Section I: Fuses with fuse-links with blade contacts. Section II: Fuses with fuse-links for bolted connections. Section III: Fuses with fuse-links having cylindrical contact caps. Section IV: Fuses with fuse-links with offset blade contacts. Section V: Fuses…

This National Standard of Canada is based on International Standard IEC 570:1995. 1 Scope This standard applies to track systems with two or more poles for the connection of luminaires to the electrical supply, either of rated voltage not exceeding 440 V between poles with provision for earthing (class I) and a rated current not exceeding 16 A per conductor, or of a rated SELV not…

This National Standard of Canada is based on International Standard CEI/IEC 598-2-2:1996 (second edition, 1996-05), including Amendment 1:1997. 2.1 Scope This section of IEC 598 specifies requirements for recessed luminaires for use with tugsten filament, tubular fluorescent and other discharge lamps to be installed and used on branch circuits not exceeding 750 V and used in accordance…

This National Standard of Canada is based on International Standard CEI/IEC 598-2-7:1982 (first edition, 1982), including Amendments 1:1987 and 2:1994. 1. Scope This section of Part 2 of IEC Publication 598 specifies requirements for portable pedestal luminaires, for use in places such as gardens and for portable luminaires for use in places such as flower beds, for use with tungsten…

Specifies a procedure for measuring the power performance characteristics of a single wind turbine generator system (WTGS) and applies to the testing of WTGS of all types and sizes connected to the electrical network.

Is applicable to devices for surge protection against indirect and direct effects of lightning or other transient overvoltages. These devices are packaged to be connected to 50/60 Hz a.c. and d.c. power circuits, and equipment rated up to 1 000 V r.m.s or 1 500 V d.c. Performance characteristics, standard methods for testing, and ratings are established for these devices that contain at least one…

Est applicable aux dispositifs de protection contre les effets directs et indirects de la foudre ou contre les surtensions transitoires. Ces dispositifs sont conçus pour être connectés à des circuits sous tension alternative 50/60 Hz ou sous tension continue et à des équipements de tension assignée efficace jusqu'à 1 000 V en courant alternatif ou 1 500 V en courant continu. Les…

Applies to all electronic equipment for control, regulation, protection, supply etc associated with the accumulator battery of the vehicle or a low voltage power supply source with or without the direct connection to the contact system. Does not apply however to electronic power circuits which conform to IEC 61287-1. It covers the conditions of operation, design, construction and testing of…