Rechercher

Applies to a.c. and d.c. machines and specifies: a) rules for the identification of winding connection points; b) marking of winding terminals; c) direction of rotation; d) relationship between terminal markings and direction of rotation; e) terminal marking of auxiliary devices; f) connection diagrams of machines for common applications. Turbine type synchronous machines are excluded in this…

This part of ISO 6489 gives specifications for the clevis couplings used in the attachment to agricultural towing vehicles of towed, non-balanced trailers and implements equipped with a coupling ring 40 specified in ISO 5692-2 and ISO 8755. The mounting of one of the three trailer coupling shapes, A, B or C, on an agricultural vehicle or trailer is at the manufacturer's or user's…

Applies to electrical and/or electronic equipment that have a rated input current up to 16 A per phase. Aims to establish a reference for evaluating the immunity of electric and/or electronic equipment when subjected to positive and negative low amplitude voltage fluctuations. Only conducted phenomena are considered, including immunity tests for equipment connected to public and industrial power…

Establishes a reference for evaluating the immunity of electric and electronic equipment when subjected to variations of the power frequency. Only conducted phenomena are considered, including immunity tests for equipment connected to public and industrial networks. This consolidated version consists of the first edition (1999) and its amendment 1 (2001). Therefore, no need to order amendment in…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-4-16:1998 (first edition, 1998-01), including Amendment 1:2001. 1 Scope This part of IEC 61000 relates to the immunity requirements and test methods for electrical and electronic equipment to conducted, common mode disturbances in the range d.c. to 150 kHz. The object of this standard is to establish a…

1. Scope 1.1 This Standard applies to unit equipment intended for connection to circuits with nominal voltages of 600 V and less, and intended for installation indoors in nonhazardous locations in accordance with the Canadian Electrical Code, Part I. 1.2 This Standard applies to unit equipment intended to provide illumination in the event of a failure of the normal power supply. 1.3 This…

1. Scope 1.1 These requirements cover residential fire warning system control units and accessories intended to be installed in accordance with the Standard for the Installation of Residential Fire Warning Systems, CAN/ULC-S540. 1.2 A residential fire warning system control unit consists of a unit assembly of electrical parts having provision for connnection of power source and initiating…

Is applicable to portable phase comparators with or without a built-in power source to be used on electrical systems for voltages from 1 kV to 36 kV a.c. and frequencies from 50 Hz to 60 Hz. This standard is applicable to two-pole phase comparators having a connecting lead between them, two-pole phase comparators operating with a wireless connection and single-pole phase comparators operating…

This part of ISO 727 specifies the dimensions of plain sockets (cylindrical and conical) in fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS), intended for connecting by solvent cementing to pipes of the corresponding material for use under pressure. The resulting joint does not require mechanical…

This Recommendation | International Standard specifies the Enhanced Communications Transport Protocol (ECTP), which is a transport protocol designed to support Internet multicast applications over multicast-capable IP networks. This Recommendation | International Standard specifies the ECTP for the simplex multicast transport connection that consists of one sender and many receivers. This…