Petroleum and natural gas industries — Procedures for testing casing and tubing connections
ISO 13679:2002 establishes minimum design verification testing procedures and acceptance criteria for casing and tubing connections for the oil and natural gas industries. These physical tests are part of a design verification process and provide objective evidence that the connection conforms to the manufacturer's claimed test load envelope and limit loads.
It categorizes test severity into…
Electrical installations for lighting and beaconing of aerodromes - AGL series transformers
IEC 61823:2002 specifies the characteristics of aeronautical ground lighting series trans-formers (AGLST) used in aeronautical ground lighting for 6,6 A series circuits, at a service voltage of up to 5 kV, supplied by constant current regulators up to 30 kVA in rating. AGL series transformers provide power to airport lighting luminaires or other loads (resistive) from their secondary circuits.…
Installations électriques pour l'éclairage et le balisage des aérodromes - Transformateurs séri...
L'IEC 61823:2002 spécifie les caractéristiques des transformateurs série utilisés pour le balisage aéronautique au sol (AGLST) pour des circuits série de 6,6 A, dont la tension de service atteint 5 kV, alimentés par des régulateurs de courant constant jusqu'à 30 kVA. Les transformateurs série AGL assurent l'alimentation des feux aéronautiques de balisage ou d'autres charges (…
Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General req...
This part of IEC 60998 applies to connecting devices as separate entities for the connection of two or more electrical copper conductors (complying with IEC 60228 or IEC 60344) rigid (solid or stranded) or flexible, having a cross-sectional area of 0,2 mm2 up to and including 35 mm2 and equivalent AWG conductors with a rated voltage not exceeding 1 000 V a.c. up to and including 1 000 Hz and 1…
Information technology — Telecommunications and information exchange between systems — Private Integ...
ISO/IEC 23290:2002 specifies functions for using an H.323 packet network in order to interconnect two Private Integrated services Network eXchanges (PINXs) forming part of a Private Integrated Services Network (PISN). Interconnection is achieved by carrying the inter-PINX signalling protocol over the H.323 call signalling channel, making use of the protocol tunnelling facilities of H.323, and…
Information technology - Telecommunications and information exchange between systems - Private Integ...
ISO/IEC 23290:2002 specifies functions for using an H.323 packet network in order to interconnect two Private Integrated services Network eXchanges (PINXs) forming part of a Private Integrated Services Network (PISN). Interconnection is achieved by carrying the inter-PINX signalling protocol over the H.323 call signalling channel, making use of the protocol tunnelling facilities of H.323, and…
Information technology - Telecommunications and information exchange between systems - Corporate tel...
ISO/IEC 23289:2002 specifies signalling interworking between "QSIG" and "H.323" in support of basic services within a corporate telecommunication network (CN).
"QSIG" is a signalling protocol that operates at the Q reference point between Private Integrated services Network eXchange (PINX) within a Private Integrated Services Network (PISN). The Q reference point is…
Information technology — Telecommunications and information exchange between systems — Corporate tel...
ISO/IEC 23289:2002 specifies signalling interworking between "QSIG" and "H.323" in support of basic services within a corporate telecommunication network (CN).
"QSIG" is a signalling protocol that operates at the Q reference point between Private Integrated services Network eXchange (PINX) within a Private Integrated Services Network (PISN). The Q reference point is…
Applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires only.
Also applies to:
-switched-lampholders for use in a.c. circuits only, where the working voltage does not exceed 250 V r.m.s;
-lampholders with Edison thread E5 designed for connection to the supply mains of series connected lamps, with a working voltage not…
Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests
This part of IEC 60896 is applicable to lead-acid cells and batteries which are designed for service in fixed locations (i.e. not habitually to be moved from place to place) and which are permanently connected to the load and to the d.c. power supply. Batteries operating in such applications are called "stationary batteries". Any type or construction of lead-acid battery may be used for…
