Rechercher

IEC 60384-19:2015 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto substrates for hybrid circuits or onto printed boards. These capacitors may have "self-…

IEC TS 62578:2015 describes the operation conditions and typical characteristics of active infeed converters (AIC) of all technologies and topologies which can be connected between the electrical power supply network (lines) a.c. side and a constant current or voltage type d.c. side and which can convert electrical power (active and reactive) in both directions (generative or regenerative). The…

L'IEC TS 62578:2015 décrit les conditions de fonctionnement et les caractéristiques typiques des convertisseurs à alimentation active (AIC), quelles que soient leurs technologies et topologies, qui peuvent être connectés entre le réseau (les phases) d'alimentation électrique côté alternatif et un type de courant ou de tension constant(e) côté continu, et qui peuvent convertir la…

ISO/IEC 17821:2015 defines the network specification for devices, which are operated on IEEE Std. 802.15.4-2011 PHY, capable to support the channel-hopped TDMA links of the DSME MAC of IEEE Std. 802.15.4e-2012, to provide low-cost communication network that allows reliable, deterministic-latency, and scalable wireless mesh connectivity. This International Standard provides the following: -…

ISO/IEC 17821:2015 defines the network specification for devices, which are operated on IEEE Std. 802.15.4-2011 PHY, capable to support the channel-hopped TDMA links of the DSME MAC of IEEE Std. 802.15.4e-2012, to provide low-cost communication network that allows reliable, deterministic-latency, and scalable wireless mesh connectivity. This International Standard provides the following: -…

ISO 27145-6:2015 defines the requirements for the external test equipment as listed: - a means of establishing communications between a WWH-OBD-equipped vehicle and external test equipment; - a set of diagnostic services, including addressing methods, to be provided by the external test equipment in order to exercise the services defined in ISO 27145‑3. ISO 27145-6:2015 describes the…

ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information storage and display units, whether mounted on, or part of, the tractor or…

This part of IEC 61000 relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 150 kHz up to 80 MHz. Equipment not having at least one conducting wire and/or cable (such as mains supply, signal line or earth connection) which can couple the equipment to…

This part of IEC 62660 specifies test procedures to observe the reliability and abuse behaviour of secondary lithium-ion cells used for propulsion of electric vehicles including battery electric vehicles (BEV) and hybrid electric vehicles (HEV). The objective of this standard is to specify the standard test procedures and conditions for basic characteristics of lithium-ion cells for use in…

This part of IEC 62660 specifies performance and life testing of secondary lithium-ion cells used for propulsion of electric vehicles including battery electric vehicles (BEV) and hybrid electric vehicles (HEV). The objective of this standard is to specify the test procedures to obtain the essential characteristics of lithium-ion cells for vehicle propulsion applications regarding capacity,…